User manual OMRON CP1E PLC BROCHURE

[. . . ] CP1E PLC The economic machine controller OMRON EUROPE B. V. Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands. [. . . ] Two different families are available: CP1E-E is the economical yet powerful model, while the CP1E-N has a built-in real time clock, motion control capabilities, and an intelligent RS-232 port for connection to an HMI, bar code reader, robot or other serial device. Several option units are available to increase the functionality. E-type Program capacity : 2 Ksteps DM Area capacity : 2 Kwords Timers/Counters : 256 each High-speed counters : 10 kHz × 6 inputs Peripheral USB port Serial Option port : 1 port*1 Pulse outputs : 100kHz x 2 outputs*2 Serial communications port : RS-232C *1 *2 : Models with 30 or 40 I/O points. : Models with transistor outputs. Peripheral USB port Analog adjusters : 2 adjusters Analog adjusters : 2 adjusters Simple and user friendly Easy to use input editor with smart input function When you begin typing an instruction in ladder editor mode, suggested instructions are displayed. EaSy Easy to reuse ladder programming Copying with address incrementing To create the same group of ladder instructions more than once with the address addition copy function, the instructions can be reused simply by inputting an address offset. intuitive menu structure Intuitive menu display An intuitively designed menu structure makes it easy to see the overall system simply by looking at the menu for smooth operation without referring to a manual. Smart Input Function Guidance display Offset set to 5 bits. . . The function required for process is grouping. enter M When you begin typing an instruction in ladder editor mode, suggested instructions are displayed. enter Select the desired instruction and the addresses will be set to one higher than the addresses M that were previously entered. enter Enter the operands. I/O comments can also be entered at the same time. only commercially available USB cables required CP1E CPU Units use USB for the peripheral port. Computers can be connected using commercially available USB cables. Without the need for USB conversion cables or special cables, connection is easier and cable cost is low. Support software enter Commercially available USB cable M M M M enter enter enter enter enter enter User-friendly ladder program input Automatic connecting line insertions With the Automatic connecting line insertions function the necessary connection is added automatically based on the curser position. Automatic column insertion when inserting instructions The column is automatically inserted when an instruction is added even if the curser is above another instruction. i/o status at a glance The terminal layout display features I/O indicators. The indicators are in the same position as the terminals to let you see the I/O status at a glance. You can easily identify I/O status or perform status checks at startup or during operation. ON ON OFF ON Sensors Visible status When an instruction is input at the curser, a connecting line is automatically inserted. When an instruction is input at the curser, a column is automatically inserted for the instruction. Efficient and effective The machine controller for Lean automation solutions The CP1E N-type CPU units are equipped with high-speed counters, pulse outputs, and a builtin serial port. [. . . ] RS-232C connectors for the built-in RS-232C port and the battery (CP1W-BAT01) are not included. *Note: CP1E-NA model available early 2010 CP1E-N20DR-A CP1E-NA20DR-A* CP1E-N20DT-A CP1E-N20DT1-A CP1E-N20DR-D CP1E-N20DT-D CP1E-N20DT1-D CP1E-NA20DT-D* CP1E-NA20DT1-D* CP1E-N30DR-A CP1E-N30DT-A CP1E-N30DT1-A CP1E-N30DR-D CP1E-N30DT-D CP1E-N30DT1-D CP1E-N40DR-A CP1E-N40DT-A CP1E-N40DT1-A CP1E-N40DR-D CP1E-N40DT-D CP1E-N40DT1-D CP1W-BAT01 RS-232C Inverter Polling Unit Polling Unit Polling Unit Polled Node No. [. . . ]