User manual OMRON D4BS DATASHEET

[. . . ] 14 GS-ET-15 SUVA File No. R9351022 (Direct opening: approved) Standards and EC Directives Conforms to the following EC Directives: Machinery Directive Low Voltage Directive EN50041 EN1088 E76675 LR45746 9303323 E6187. d Approved Standard Ratings TÜV (EN60947-5-1) Utilization category Rated operating current (Ie) Rated operating voltage (Ue) AC-15 2A 400 V Note: Use a 10-A fuse type a gI or gG that conforms to IEC269 as a short-circuit protection device. UL/CSA (UL508, CSA C22. 2 No. 14) A600 Rated voltage 120 VAC 240 VAC 480 VAC 600 VAC Carry current 60 A 30 A 15 A 12 A Current Make 6A 3A 1. 5 A 1. 2 A Break Make Volt-amperes Break 10 A 7, 200 VA 720 VA G-144 Safety Sensors / Components Characteristics Degree of protection (see note 2) Durability (see note 3) Operating speed Operating frequency Rated frequency Contact gap Direct opening force (see note 4) Direct opening travel (see note 4) Full stroke Insulation resistance Contact resistance Rated insulation voltage (Ui) Conventional enclosed thermal current (Ithe) Dielectric strength (Uimp) Switching overvoltage Conditional short-circuit current Pollution degree (operating environment) Insulation class Vibration resistance Shock resistance Ambient temperature Ambient humidity Weight IP67 (EN60947-5-1) Mechanical:1, 000, 000 operations min. (10 A at 250 VAC, resistive load) 0. 1 m/s to 0. 5 m/s 30 operations/min max. (at 500 VDC) between terminals of same or different polarity, between each terminal and ground, and between each terminal and non-current-carrying metal part 25 m max. [. . . ] (Built into the Unit. ) Seal Packing (NBR) Conduit Opening Available in four different types of conduit threads: Pg 13. 5, G1/2, or 1/2-14NPT, M20. G-146 Safety Sensors / Components Dimensions Note: 1. All units are in millimeters unless otherwise indicated. Unless otherwise specified, a tolerance of ±0. 4 mm applies to all dimensions. The conduit thread varies with the model as follows:. Conduit thread Pg 13. 5 G1/2 M20 Model D4BS-1##S, D4BS-5##S D4BS-2##S, D4BS-6##S D4BS-4##S, D4BS-8##S Switches 1-conduit D4BS-1##S D4BS-2##S D4BS-4##S 31. 4 17 Red 35 (111. 5) 60±0. 2 Two, 5. 3 dia. mounting holes Two, M4 cover clamping screws 7. 3 8 5. 3 30±0. 1 40+1 0 Cover 7 41 16 Four, M3. 5 head clamping screws Operating characteristics Key insertion force Key extraction force 34. 5 D4BS-1##S D4BS-2##S D4BS-4##S 19. 61 N max. 20 mm min. Pretravel (PT) 77 Direct opening force Direct opening stroke 15 31. 5 43 41 D4BS-1##S: Pg13. 5 D4BS-2##S: G1/2 D4BS-4##S: 1/2-14NPT 3-conduit D4BS-5##S D4BS-6##S D4BS-8##S 31. 4 17 Red 5. 3 (110) 50. 9 66. 4 Six, 5. 3 dia. mounting holes Four, M3. 5 x 10 cover clamping screws Two caps Cover 7 16 Four, M3. 5 head clamping screws Operating characteristics 34. 5 Key insertion force Key extraction force D4BS-5##S D4BS-6##S D4BS-8##S 19. 61 N max. 20 mm min. 30±0. 2 Pretravel (PT) 71. 4 75. 4 Direct opening force Direct opening stroke 51 28. 5 57 63 17. 2 D4BS-5##S: 3-Pg13. 5 D4BS-6##S: 3-G1/2 D4BS-8##S: 3-1/2-14NPT Two, 5+0. 15 dia. holes (6 mm deep) -0 35. 7 38. 3 Operation Keys 53. 7 D4BS-K1 26 15 78. 7 20±0. 15 40. 7 12 D4BS-K2 Black 7. 3 15 Two, 2. 65R 7. 5 2. 5 20 11. 4 5 40 12 20 15 4 dia. 26 15 13 5. 3 ¥ 7. 3 mounting long hole Black 40±0. 15 52. 4 36 11. 4 5 4 dia. 5. 3 5. 3 36 5. 3 12 7. 5 20 D4BS-K3 Black 40 30±0. 15 26 (80. 7) 36 11. 4 2. 5 19. 5±0. 15 Red 5. 3 dia. mounting hole 30 5 (37. 8) 4 dia. 17. 5 34. 6 M4 Allen-head bolt D4BS G-147 D4BS 2. 5 With Operation Key Inserted Horizontal Mounting D4BS-1##S +D4BS-K1 D4BS-2##S +D4BS-K1 D4BS-4##S +D4BS-K1 Red 53. 5 min. 58 max. Operation Key insertion radius in horizontal direction: R 1200 Operation Key insertion radius in horizontal direction: R 1000 53. 5 min. 58 max. Vertical Mounting D4BS-1##S +D4BS-K2 D4BS-2##S +D4BS-K2 D4BS-4##S +D4BS-K2 Red 54. 5 min. 59 max. Operation Key insertion radius in horizontal direction: R 1200 Operation Key insertion radius in horizontal direction: R 1000 54. 5 min. 59 max. Adjustable Mounting (Horizontal) D4BS-1##S +D4BS-K3 D4BS-2##S +D4BS-K3 81. 5 min. D4BS-4##S +D4BS-K3 86 max. Red Operation Key insertion radius in horizontal direction: R 150 81. 5 min. 86 max. Operation Key insertion radius in horizontal direction: R 1000 Note: "R" is the Operation Key insertion radius. Note: Unless otherwise specified, a tolerance of ±0. 4 mm applies to all dimensions. G-148 Safety Sensors / Components Precautions Do not dismount the Operation Key from the door intentionally and insert it to the Switch with the door open. Machine may start operating and injury or death may be caused. Mount the Operation Key at a location where it will not come in contact with users when the door is opened or closed. When operating the D4BS as a part of a safety category circuit to prevent injury, operate the NC contacts that have a direct opening mechanism in direct opening mode. [. . . ] Switch Excessive force Drop ±0. 5 min. D4BS G-149 D4BS Secure the Operation Key with a one-way screw, or an equivalent, so that the Operation Key cannot be easily removed. Other Make sure that the D4BS is located outside the safety door and that no metal dust, oil, or chemical will be sprayed onto the D4BS. Excessive tightening torque may damage the casing. When using a 1/2-14NPT conduit, apply sealing tape between connector and conduit opening so that the enclosure will confirm to IP67. If using a Pg13. 5 conduit, use an ABS-08 Pg13. 5 connector or an ABS-12 Pg13. 5 connector (manufactured by Nippon Flex). [. . . ]