User manual OMRON G3PE-SINGLE-PHASE

[. . . ] Solid State Relays for Heaters G3PE-Single-phase CSM_G3PE-Single-phase_DS_E_2_1 Compact, Slim-profile SSRs with Heat Sinks. Models with No Zero Cross for a Wide Range of Applications. · RoHS compliant. · Models also available with no zero cross · Surge pass protection improved surge dielectric strength for output currents. (OMRON testing) · Compact with a slim profile. [. . . ] (24 VDC) Main Circuit of Models with Built-in Heat Sinks Item Model G3PE- G3PE- G3PE- G3PE- G3PE- G3PE- G3PE- G3PE- G3PE- G3PE- G3PE- G3PE- G3PE- G3PE- G3PE- G3PE215B- 215B- 225B- 225B- 235B- 235B- 245B- 245B- 515B- 515B- 525B- 525B- 535B- 535B- 545B- 545B3(N) 2(N) 3(N) 2(N) 3(N) 2(N) 3(N) 2(N) 3(N) 2(N) 3(N) 2(N) 3(N) 2(N) 3(N) 2(N) 100 to 240 VAC 75 to 264 VAC *1 Rated load voltage Operating voltage range Rated load current Inrush current resistance (peak value) Permissible I2t (reference value) Applicable load (resistive load: AC1 class) *2 15 A (at 40°C) Minimum load current 0. 2 A 200 to 480 VAC 180 to 528 VAC 45 A (at 25°C) 15 A (at 40°C) 25 A (at 40°C) 35 A (at 25°C) 45 A (at 25°C) 25 A (at 40°C) 35 A (at 25°C) 0. 5 A 440 A (60 Hz, 1 cycle) 1, 260A2s 12. 1 kW (at 200 VAC) 15. 5 kW (at 200 VAC) 220 A (60 Hz, 1 cycle) 260A2s 12. 5 kW (at 480 VAC) 20. 7 kW (at 480 VAC) 440 A (60 Hz, 1 cycle) 1, 260A2s 29. 0 kW (at 480 VAC) 37. 4 kW (at 480 VAC) 150 A 220 A (60 Hz, 1 cycle) (60 Hz, 1 cycle) 121A2s 5. 1 kW (at 200 VAC) 260A2s 8. 6 kW (at 200 VAC) *1. The applicable load current depends on the ambient temperature. Ambient Temperature in Engineering Data on page 5. Applicable Load Use the following formula to calculate the maximum total capacity of a heater load for a three-phase balanced load with delta connections. Maximum load capacity = Load current × Load voltage × 3 Example: 15 A × 200 V × 3 = 5, 196 W 5. 1 kW Example: 15 A × 400 V × 3 = 10, 392 W 10. 3 kW Main Circuit of Models with Externally Attached Heat Sinks Item Model G3PE- G3PE- G3PE- G3PE- G3PE- G3PE- G3PE- G3PE- G3PE- G3PE- G3PE- G3PE- G3PE- G3PE- G3PE- G3PE215B- 215B- 225B- 225B- 235B- 235B- 245B- 245B- 515B- 515B- 525B- 525B- 535B- 535B- 545B- 545B3H 2H 3HH 2H 3H 2H 3H 2H 3H 2H 3H 2H 3H 2H 3H 2H 100 to 240 VAC 75 to 264 VAC * Rated load voltage Operating voltage range Rated load current Inrush current resistance (peak value) Permissible I2t (reference value) Applicable load (resistive load: AC1 class) 15 A (at 40°C) Minimum load current 0. 2 A 200 to 480 VAC 180 to 528 VAC 45 A (at 25°C) 15 A (at 40°C) 25 A (at 40°C) 35 A (at 25°C) 45 A (at 25°C) 25 A (at 40°C) 35 A (at 25°C) 0. 5 A 440 A (60 Hz, 1 cycle) 1, 260A2s 220 A (60 Hz, 1 cycle) 260A2s 440 A (60 Hz, 1 cycle) 1, 260A2s 150 A 220 A (60 Hz, 1 cycle) (60 Hz, 1 cycle) 121A2s 260A2s Refer to Engineering Data on page 5. * The rated load current depends on the heat sink or radiator that is mounted. It also depends on the ambient temperature. Ambient Temperature in Engineering Data on page 5. 3 G3PE-Three-phase Characteristics Models with Built-in Heat Sinks Model Item Operate time Release time Output ON voltage drop Leakage current * Insulation resistance Dielectric strength Vibration resistance Shock resistance Ambient storage temperature Ambient operating temperature Ambient operating humidity Weight G3PE215B3(N) G3PE215B2(N) G3PE225B3(N) G3PE225B2(N) G3PE235B3(N) G3PE235B2(N) G3PE245B3(N) G3PE245B2(N) G3PE515B3(N) G3PE515B2(N) G3PE525B3(N) G3PE525B2(N) G3PE535B3(N) G3PE535B2(N) G3PE545B3(N) G3PE545B2(N) 1/2 of load power source cycle + 1 ms max. 1/2 of load power source cycle + 1 ms max. (at 500 VDC) 2, 500 VAC, 50/60 Hz for 1 min · DIN Track mounting: 10 to 55 to 10 Hz, 0. 175-mm single amplitude (0. 35-mm double amplitude) · Screw mounting: 10 to 55 to 10 Hz, 0. 375-mm single amplitude (0. 75-mm double amplitude) 294 m/s2 (reverse mounting: 98 m/s2) -30 to 100°C (with no icing or condensation) 1. 8 V (RMS) max. (at 480 VAC) -30 to 80°C (with no icing or condensation) 45% to 85% Approx. 1. 25 kg * The leakage current of phase S will be approximately 3 times larger if the 2-element model is used. Models with Externally Attached Heat Sinks Model Item Operate time Release time Output ON voltage drop Leakage current * Insulation resistance Dielectric strength Vibration resistance Shock resistance Ambient storage temperature Ambient operating temperature Ambient operating humidity Weight G3PE215B3H G3PE215B2H G3PE225B3H G3PE225B2H G3PE235B3H G3PE235B2H G3PE245B3H G3PE245B2H G3PE515B3H G3PE515B2H G3PE525B3H G3PE525B2H G3PE535B3H G3PE535B2H G3PE545B3H G3PE545B2H 1/2 of load power source cycle + 1 ms max. 1/2 of load power source cycle + 1 ms max. (at 500 VDC) 2, 500 VAC, 50/60 Hz for 1 min 10 to 55 to 10 Hz, 0. 375-mm single amplitude (0. 75-mm double amplitude) Destruction: 294 m/s2 -30 to 100°C (with no icing or condensation) 1. 8 V (RMS) max. (at 480 VAC) -30 to 80°C (with no icing or condensation) 45% to 85% Approx. 300 g * The leakage current of phase S will be approximately 3 times larger if the 2-element model is used. Heat Sinks Model Y92B-P50 Y92B-P100 Y92B-P150 Y92B-P200 Y92B-P250 Weight Approx. 1, 200 g 4 G3PE-Three-phase Engineering Data Input Voltage vs. Input impedance (k) Input current (mA) 10 9 8 7 6 G3PE-5 Input impedance (k) Input current (mA) 15 14 13 12 11 10 9 8 7 6 5 Input impedance 4 Input impedance 3 2 1 0 Input current Ta = 25°C Input current 5 4 3 2 1 0 5 10 15 20 25 30 35 0 5 10 15 20 25 30 35 Input voltage (V) Input voltage (V) Load Current vs. Ambient Temperature Models with Built-in Heat Sinks G3PE-215B-3(N), G3PE-225B-3(N) G3PE-215B-2(N), G3PE-225B-2(N) G3PE-515B-3(N), G3PE-525B-3(N) G3PE-515B-2(N), G3PE-525B-2(N) Load current (A) 30 G3PE-235B-3(N), G3PE-245B-3(N) G3PE-235B-2(N), G3PE-245B-2(N) G3PE-535B-3(N), G3PE-545B-3(N) G3PE-535B-2(N), G3PE-545B-2(N) Load current (A) 50 45 40 35 G3PE-235B-3(N) 30 G3PE-235B-2(N) G3PE-535B-3(N) G3PE-535B-2(N) 20 18 14 12 10 * G3PE-245B-3(N) G3PE-245B-2(N) G3PE-545B-3(N) G3PE-545B-2(N) 25 20 G3PE-225B-3(N) G3PE-225B-2(N) G3PE-525B-3(N) G3PE-525B-2(N) 15 10 7 G3PE-215B-3(N) G3PE-215B-2(N) G3PE-515B-3(N) G3PE-515B-2(N) 0 -30 -20 0 20 40 60 80 100 0 -30 -20 * The dotted lines in the charts are the UL derating curves for the G3PE-235B-3(N), G3PE-245B-3(N), G3PE-235B-2(N), G3PE-245B-2(N), G3PE-535B-3(N), G3PE-545B-3(N), G3PE-535B-2(N), G3PE-545B-2(N). 0 20 25 40 60 80 100 Ambient temperature (°C) Ambient temperature (°C) Models with Externally Attached Heat Sinks G3PE-215B-3H(-2H) G3PE-225B-3H(-2H) G3PE-515B-3H(-2H) G3PE-525B-3H(-2H) Load current (A) 10 G3PE-235B-3H(-2H) G3PE-245B-3H(-2H) G3PE-535B-3H(-2H) G3PE-545B-3H(-2H) Load current (A) 10 G3PE-235B-3H(-2H) G3PE-245B-3H(-2H) G3PE-535B-3H(-2H) G3PE-545B-3H(-2H) 8 8 G3PE-225B-3H(-2H) G3PE-525B-3H(-2H) 6 5 6 G3PE-215B-3H(-2H) 4 G3PE-515B-3H(-2H) 4 2 2 0 -30 -20 0 20 40 60 80 100 0 -30 -20 0 20 25 40 60 80 100 Ambient temperature (°C) Ambient temperature (°C) 5 G3PE-Three-phase Inrush Current Resistance: Non-repetitive Keep the inrush current to below the inrush current resistance value (i. e. , below the broken line) if it occurs repetitively. G3PE-235B-3(N)(H), G3PE-535B-3(N)(H) G3PE-215B-3(N)(H) G3PE-225B-3(N)(H), G3PE-525B-3(N)(H) G3PE-235B-2(N)(H), G3PE-535B-2(N)(H) G3PE-215B-2(N)(H) G3PE-225B-2(N)(H), G3PE-525B-2(N)(H) G3PE-245B-3(N)(H), G3PE-545B-3(N)(H) G3PE-515B-3(N)(H), G3PE-245B-2(N)(H), G3PE-545B-2(N)(H) G3PE-515B-2(N)(H), Inrush current (A. Peak) 30 50 100 300 500 1, 000 3, 000 5, 000 250 250 500 200 200 400 150 150 300 100 100 200 50 50 100 0 10 30 50 100 300 500 1, 000 3, 000 5, 000 0 10 0 10 30 50 100 300 500 1, 000 3, 000 5, 000 Energized time (ms) Energized time (ms) Energized time (ms) Heat Sink Area vs. Load Current (40°C and 80°C) G3PE-225B-3H Heat sink area (cm 2) 50, 000 30, 000 Ambient temperature + 80°C Ambient temperature + 40°C G3PE-525B-3H Heat sink area (cm 2) 50, 000 30, 000 Ambient temperature + 80°C Ambient temperature + 40°C 10, 000 5, 000 3, 000 10, 000 5, 000 3, 000 Aluminum plate t = 3. 0 1, 000 500 300 1, 000 500 300 Aluminum plate t = 3. 0 Note: The heat sink area is the combined area of all surfaces of the heat sink that radiate heat. [. . . ] 55 max. Heat Sink Y92B-P150 For G3PE-225B-3H, G3PE-235B-2H, G3PE-525B-3H, and G3PE-535B-2H Four, M4 100 Heat Sink Y92B-P200 For G3PE-235B-3H, G3PE-245B-2H, G3PE-535B-3H, and G3PE-545B-2H 120 Four, M4 5 90 110. 5 max. 5 90 130. 5 max. Heat Sink Y92B-P250 For G3PE-245B-3H and G3PE-545B-3H 120 M4-D10 Four, M4 5 68 68 68 47. 6 190. 5 150 max. Four, R2. 5 68 110. 5 max. Four, R2. 5 68 120 130. 5 max. Four, R2. 5 M4-D10 68 120 130. 5 max. 70 max. 70 max. 70 max. Mounting Holes Mounting Holes Mounting Holes Four, 4. 5 dia. or M4 90±0. 3 90±0. 3 150±0. 3 100±0. 3 120±0. 3 120±0. 3 12 Read and Understand This Catalog Please read and understand this catalog before purchasing the products. [. . . ]