User manual OMRON H5S DATASHEET

[. . . ] Digital Time Switch H5S Easier, More Convenient Time Switches, with New 4-circuit Output and Yearly Models in Addition to 2-circuit Weekly Models · Independent Day Keys provide easier operation. · Temporary holiday setting function makes it easy to turn OFF output for holidays and non-operating days. · Settings can be made even with the Time Switch turned OFF. · Test mode enables easy program checking. [. . . ] *1 If one or more programs have already been set, the display starts showing the set programs. To add another program, press WRITE repeatedly until "--:--" is displayed. *2 Holding down the h and m Keys rapidly advances the value. decrements the value of the key that was last Set the OFF time with h and m . *1 If one or more programs have already been set, the display starts showing the set programs. To add another program, press WRITE repeatedly until "--:--" is displayed. *2 Holding down the h and m Keys rapidly advances the value. Pressing decrements the value of the key that was last pressed. Note: · If multiple settings are required, repeat steps 2 through 4. · Both the ON and OFF times must be set. · All of the weekly programs for the selected circuit (output) can be checked by pressing WRITE in program setting mode. · When the Mode Switch is set to P1 or P2 (to PRGM for 4-circuit models), the Time Switch stops automatic operation. To forcibly turn ON or OFF the output, use the Output ON/OFF Switches. · The set data will be cleared if the Output Setting Switch is moved between the TIMER and PULSE positions after the data has been set. Digital Time Switch H5S 15 Multiple-day Operation 2 Weekly, 2 Circuits Yearly, 2 Circuits Yearly, 4 Circuits Example: ON at 22:00 from Monday through Friday and OFF at 8:00 each following morning. SUN MON TUE WED THU FRI SAT Pulse-output Operation Weekly, 2 Circuits Yearly, 2 Circuits Yearly, 4 Circuits Example: ON for 30 seconds at 8:25 am from Monday through Saturday. SUN MON 30 s TUE WED THU FRI SAT 22 8 22 8 22 8 22 8 22 8 Number of remaining steps AM8:25 1. *1 (The Time Switch enters program setting mode. ) For 4-circuit models, refer to page 18. P1 P2 RUN Shaded portion indicates blinking of the indicator. 1. Set the Mode Switch to P1 or P2. *1 (The Time Switch enters program setting mode. ) For 4-circuit models, refer to page 18. P1 P2 RUN Shaded portion indicates blinking of the indicator. Number of remaining steps TIMER PULSE SUN MON TUE WED THU FRI SAT TIMER PULSE SUN MON TUE WED THU FRI SAT 2. Press the Day Keys to turn ON the bar ( ) at the positions of Monday through Friday. Press the Day Keys to turn ON the bars ( ) at the positions of Monday through Saturday. Set the ON time with h and m . Press MON to turn OFF the bar ( ) at the Monday position and press SAT to turn ON the bar ( at the Friday position. *2 The displayed pulse width changes by pressing this key in the following order. 1s2s. . . 59s1m. . . 59m60m1s SUN MON TUE WED THU FRI SAT Set the OFF time with h and m . *1 If one or more programs have already been set, the display starts showing the set programs. To add another program, press WRITE repeatedly until "--:--" is displayed. *2 Holding down the h and m Keys rapidly advances the value. [. . . ] Select one of the parameters using h or m . Press WRITE to enter the setting. Digital Time Switch H5S 25 Summer Time Schedule Selection (F7) Yearly, 2 Circuits Yearly, 4 Circuits The time and date when the Time Switch automatically switches to and from summer time can be selected with reference to the following regions. Parameters Regions us Summer time start date and time At 2:00 on the first Sunday in April At 2:00 on the last Sunday in March At 2:00 on the last Sunday in October Summer time end date and time At 2:00 on the last Sunday in October At 3:00 on the last Sunday in October At 3:00 on the last Sunday in March (North America) (Europe) (Australia) eu aust Note: The inverted characters indicate the default. Setting method Shaded portion indicates blinking of the indicator. 1. Press h or m to select one of the parameters. Press WRITE to enter the setting. About the Self Diagnosis Function The following indications will be displayed when an error is generated. [. . . ]