User manual OMRON NT3S BROCHURE

[. . . ] You can also use comprehensive graphics to monitor your application. This product is a step up from our NT2S/NT11S function key series and a step up to our more intelligent NS-series. Small, Powerful, Flexible, Economic . . . . . NT3S The NT3S applications are designed by making use of standard objects like text displays, bar graphs and lamps, and on the other hand by tasks that can for instance be assigned to buttons and screens. [. . . ] Acknowledgement can be prohibited by password. 7 Showing and entering data is easy with the NT3S. Data can be shown in the desired format (HEX, BCD etc. ). Entering data is performed with a pop-up keypad. NT3S Touch Screen Series featuring: · 4. 1" monochrome STN LCD with LED backlight (long lifetime) · Maximum of two universal (RS232/485/422) serial ports to connect multiple devices with different protocols at the same time Outstanding in many applications The NT3S is capable of communicating trough two serial ports with two different protocols at the same time. This means that you can connect a PLC on the first port and for instance an Inverter or a Servo Drive on the second port. The NT3S can act as gateway by reading bits or words from the PLC and "copy" them to a drive, for instance to start/stop the drive. Also you can start and stop a drive from the NT3S directly or write variables/parameters like speed, distance, voltage or torque. You can save a lot of money by communicating directly to devices like Servo Drives or Inverters. You don't need a bus-system master in your PLC and you don't need a special Inverter with a bus-interface, because most Inverters can communicate by a standard serial protocol without extra costs. Add to this the touch screen, the multi-language possibility, the optional real-time clock and the graphical features, like analogue meters and bar graphs, and you have a product that can really upgrade the functionality of machines with ordinary switches or buttons. The NT3S is programmed with the same software as our NT2S function key terminal, so if you use a NT2S and your customers ask for more functionality, the NT3S is the product to use!You can download the NT-XS software from the Omron Software Registration & Download Area (http://www. europe. omron. com). · Drivers for most PLCs, Inverters and Servo Controllers · Multiple data entry objects per screen with individual limit setting and math operations · Support for floating point data · Wizards for rapid application development of standard bitmapped objects · Real-time and historical alarms (historical alarms in RTC version only) · Trend graph for defined tags (RTC models only) · Saves recipes data in non-volatile memory · Windows® based programming software NT-XS for free!· IP65 design, CE/cULus Class 1 Div 2 certification* * Class 1 Div 2 pending A Two port solutions A typical application for the NT3S is a machine where an Omron PLC and Intelligent Servo Drives are used. The NT3S can be used to communicate with both the PLC and the Servo Drives. This means setting parameters, reading and writing variables like speed, torque, distance and actual position. It is also possible to move data from the PLC to the Servo Drive (e. g. The NT3S gives you the advantage of being able to communicate with A the drives without using a bus-system, so a smaller and less expensive PLC can be used. [. . . ] of registered screens Screen data capacity (standard) Internal memory Printer connection Backlight life Multi-vendor support 2x RS232 24V DC ±15% Analog Resistive CE, cULus (Class 1 Div 2 pending) Rectangle, Rounded Rectangle, Circle, Oval, Line, Bitmaps 32 characters x 8 lines 65, 000 max. (limited by memory capacity) 120 Kb 1 kWords data memory, 1 kWords retentive, 64 words system memory Supported LED, min 50, 000 hours Supports most third party PLCs* * Please contact your local Omron representative for a list of available drivers. NT3S-ST126 NT3S-ST124 140 X 77 X 35 NT3S-ST123 NT3S-ST121 LCD 4. 1 inch, STN, monochrome display 98 X 35 mm (4. 1 inch) Green LCD, monochrome 1x RS232, 1x RS485/422/232 2x RS485/422/232 Supported Cable ordering information Product Name NT2S-CN212-V1 NT2S-CN215-V1 NT2S-CN223-V2 NT2S-CN002 Product description NT3S to peripheral port CPM-series (except CPM2C); 2 metre NT3S to peripheral port CPM-series (except CPM2C); 5 metre NT3S to mini-peripheral port CJ1/CS1-series and CPM2C-series; 2 metre NT2S and NT3S programming cable; 2 metre OMRON EUROPE B. V. Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands. [. . . ]