User manual OMRON WS02-NCTC1-E 07-2001

[. . . ] WS02-NCTC1-E CX-Position Operation Manual Produced July 2001 iv Notice: OMRON products are manufactured for use according to proper procedures by a qualified operator and only for the purposes described in this manual. The following conventions are used to indicate and classify precautions in this manual. Always heed the information provided with them. Failure to heed precautions can result in injury to people or damage to property. [. . . ] Under the NC on the project tree, either double-click Edit Dwell Time, or select it and press the Enter Key 49 Setting Editing Screens 2. The following screen will be displayed. Section 4-2 To Display the Zone Editing Screen 1, 2, 3. . . Under the NC on the project tree, either double-click Edit Zone, or select it and press the Enter Key 2. The following screen will be displayed. 50 Setting Editing Screens To Display All Editing Screens Section 4-2 To display all editing screens, select the NC and select Edit/Display All. Example: The following screen will be displayed after selecting Edit/Display All. If multiple setting screens are displayed, select the screen to be edited to activate it, and edit individual settings. To Use Each Editing Screen Window Use the Window Menu to select various screen displays, minimize, and close screens, and arrange their contents. Main menu Window (W) Command Display All Icon All Cascade Tile Horizontally Tile Vertically Arrange Icons Close All Project Function Displays all minimized screens. Arranges iconized screens within the window. Selects the project tree. Screens can also be displayed and minimized by clicking directly on the upper-right screen buttons. Click a minimized screen or on the left side of any screen's title bar to display the following menus. Minimized screen Title bar 51 Setting Editing Screens Menu items and functions will be as follows. Menu item Restore Move Size Minimize Maximize Close Next Moves screens. Function Section 4-2 Restores minimized screens to the project window. 4-2-2 Editing Settings All settings can be set by selecting items from the drop-down lists on the Setting Editing Screens or by directly entering item list numbers. Use one of the following procedures to set individual setting types. To Enter Settings Selecting Items From Drop-Down Lists 1, 2, 3. . . On the Setting Editing Screen, select the setting to be made, and either click the drop-down list arrow, or press the Space Bar. Example: The following screen will be displayed when selecting from the drop-down list on the Pulse Rate Screen 2. Select an item from the expanded drop-down list either by clicking on it directly, or by using the Up or Down Keys or entering its list number (0, 1, 2 etc. ). Press the Enter Key to collapse the list and set the settings. Entering Settings Using List Numbers 1, 2, 3. . . In the Setting Editing Screen, enter the desired settings directly. Press the Enter Key, or use the Up or Down Keys, to set the setting. Settings can be displayed in either hexadecimal or decimal format. (Refer to 4-2-3 To Switch Settings Display Formats. ) 2. When the Setting Editing Screen is active, the left-hand side of its status bar will display the possible range for entries. Possible range for entries is displayed Press the Backspace Key before setting an entry to alter it. Note If entering settings directly, decimal values must be entered starting with the leading zero (i. e. , 0. ). To Move the Cursor Move the cursor in individual Setting Editing Screens either by using the Cursor Keys or by clicking in the screen directly. 52 Setting Editing Screens To Move the Screen Section 4-2 Settings that cannot be displayed in a single screen can be viewed either by pressing the PageDown Key or by using the scroll bar on the right-hand side of the screen. 4-2-3 Switching Setting Display Formats Settings on any Setting Editing Screen can be displayed in either hexadecimal or decimal format. Switching the Current Settings Display Format Switch the display format by selecting Hexadecimal or Decimal under View/ Change Display on the Setting Editing Screen or by right-clicking and selecting Hexadecimal or Decimal from the pop-up menu. [. . . ] An attempt was made to save data to flash memory, but the data couldn't be saved because of a problem with the flash memory. The error will be cleared if the data is written normally. Replace the Unit if the error occurs again. (In some cases the data save operation can take up to 30 s. ) Clearing method Section 10-1 Operation after error Intelligent IORD format Read/Write error The current data transExecute the instruction again after correct- fer will not be executed, but other ing the data. [. . . ]