User manual OMRON Z510

[. . . ] · The high-speed 10-ms measurement period allows 100% in-line inspection. · Automatic light intensity (brightness) adjustment provides stable measurement of fluctuating metal surfaces. · The compact sensor head contains both the transmitter and receiver, so mounting space is not an issue. Z510 Features Improve quality by performing 100% inspection of weld strength uniformity. Display the Inspection Results or 3D Shape Data Flatness Step Depth:Bead Gap Flatness PEAK-BTM Length OK ( 0/ 201) Last : -0000. [. . . ] (See note 4. ) 0. 3 µm (See notes 7 and 8. ) 1 µm (See notes 7 and 8. ) IP64 IP66 Illumination at light-receiver surface: 3, 000 lx max. (incandescent light) Operating: 0 to 50° C (with no icing or condensation) Storage: -15 to 60° C (with no icing or condensation) Ambient humidity Operating and storage: 35% to 85% (with no condensation) Vibration (de10 to 150 Hz (double amplitude of 0. 35 mm) for 8 minutes each in the X, Y, and Z directions struction) Controller: Die-cast aluminum Materials Cable sheathing: Heat-resistant PVC Connector: Zinc alloy and brass Cable length 0. 5 m Minimum bending radius 68 mm Weight Approx. The minimum light intensity at the edges of the beam is defined as 1/e2 (13. 5%) of the intensity at the center of the beam. Some light will scatter beyond this beam region and the measurement may be affected if the immediate vicinity around the workpiece is highly reflective. This is the error with respect to the theoretical line of the displacement output when measuring the standard OMRON quartz glass. The linearity may vary depending on the workpiece being used. This is the error with respect to the theoretical line of the displacement output when measuring a standard OMRON stainless-steel block. The linearity may vary depending on the workpiece being used. This is the error with respect to the theoretical line of the displacement output when mea- Z510-SW17 suring the standard OMRON white alumina ceramic. The linearity may vary depending on 120 mm the workpiece being used. This is the displacement output's peak-to-peak displacement conversion value. These figures are for measurement of the standard OMRON quartz glass (mirror reflection) or stan- 80 mm ±0. 1% max. dard OMRON stainless-steel block (diffuse reflection) at the center of the measurement 80 mm region. The resolution performance characteristics may not be met when operating in a 120 mm Distance magnetic field. [. . . ] (See note 2. ) (See note 3. ) 0. 25 µm (See notes 5 and 6. ) 9. 94 ms Lit when the laser is ON. 0. 01% F. S. /° C ±5 mm ±4 mm ±20 mm Visible semiconductor laser (Wavelength: 658 nm, 15 mW max. , class 3B) ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0. 03937. [. . . ]