User manual OMRON ZFX-C-CD APPENDIX

[. . . ] Q28E-EN-01 Smart Sensor ZFX-C Appendix for ZFX-C_-CD Code reading functionality USERS MANUAL ZFX-C1_/C2_-CD Additional Functions Instructions This document describes the additional functions of the ZFX-C1_/C2_-CD. Other functions are the same as those for the ZFX-C1_/C2_. Also read the User's Manual (Z264) for the ZFX-C1_/C2_. Functions original to the ZFX-C1_/C2_-CD are as follows: ·Three measurement items: Barcode, 2D Code, Multi Colors ·Auto functions Inspection by Individual Application Barcode This function reads and verifies barcodes. [. . . ] (0: OK, -1: NG, -2: not measured) Outputs the verification results (master model No. ). (-2: verification results OFF or read error, -1: verification results NG, 0 to 31: model No. ) Outputs the read number of characters. (0 to 1024) Outputs the read text string. Only codes that can be registered manually and 2-byte characters can be displayed as text string in the result display screen. Other character codes (including control codes) that are read are displayed as spaces. The read string is displayed up to 32 characters. When more than 32 characters are read, "···" is displayed at the end of the string. 6 ZFX-C1_/C2_-CD Additional Functions Instructions 2D Codes This function reads and verifies 2D codes. Read results and verification results can also be output. Measurement items to be executed from this measurement item onwards can also be specified according to the verification results. This allows you to specify a measurement flow matched to the code type. Data Matrix(EC200), QR Code, MicroQR Code, PDF417, MicroPDF417, Maxi Code, AZtec Code, Codablock Setup Draw the measurement region, then execute AUTO setting. The code type and some of the decode conditions are automatically set. Measurement One 2D barcode is read in a single measurement region. When the measurement region contains multiple 2D codes, the result of the first 2D code to be read is output. Measurement region Important Reading will end in error if the 2D Code type is incorrectly set. Set the code type before starting reading. When AUTO setting is executed, the captured 2D barcode is read, and the following items can be set: ·Code type p. 11 ·Mirror p. 11 ·Code color (for Data Matrix and PDF417 only) p. 11 ·Shape (for Data Matrix only) p. 11 Region settings This function sets the measurement region. MENU mode - [Setup] - [Item] - [Region] Item Measurement region Description Sets the region to be measured. ZFX-C1_/C2_-CD Additional Functions Instructions 7 Registering the master data for verification Master data are used for verification. After reading process, the read text string can be verified against the preregistered master data. 32 sets of master data can be registered as text string. Also, processing to be executed from this measurement item onwards can also be branched according to the verification results when measurement control function is ON. MENU mode - [Setup] - [Item] - [Master data] Item Masterdata Description There are two modes for registering master data, auto setting and manual setting. Auto setting: The actual code is used to register the master data. When [Partial verification] is set to ON ON, set the first and last compared digit positions. Up to 32 1 to 1024 (default value first characters can be set as the number of digits. [. . . ] (0 to 9999999. 999) The area difference obtained by "measurement value - reference value" is output. (9999999. 999 to 9999999. 999) ZFX-C1_/C2_-CD Additional Functions Instructions 13 Auto functions AUTO button (RUN mode) In the RUN mode, all measurement items can be batch-set automatically by pressing the [AUTO] button. AUTO setting content differs with each measurement item. For details, see "AUTO Setting" in Chapter 7 of the ZFX User's Manual. MENU mode - [System] - [Operation] - [AUTO Button (RUN mode)] Setup Item ON OFF Description In the RUN mode, when the [AUTO] button is pressed, automatic setting of all measurement items is executed. [. . . ]