User manual ONE FOR ALL 3 DEVICES UNIVERSAL REMOTE CONTROL

[. . . ] Press MUTE once to turn sound off or on. Press PREV CH once to recall the last-viewed channel and to page back one screen on the main menu. Press ENTER once after entering channel numbers on some TV models. Use MENU (or EXIT) to choose options (or exit) from your selected device's menu or guide. [. . . ] PROBLEM: Changing channels does not work properly. To Change Volume Lock To Another Mode: 1. On the remote control, press and hold SET until the LED blinks twice, then release SET. Enter 9 - 9 - 3 and then press any mode key once (except TV). Now, whenever you press VOL+, VOL­, or MUTE, volume will be controlled by your mode choice. PROGRAMMING DEVICE CONTROL The One For All 3 Devices remote control is preprogrammed at the factory to operate an RCA TV and VCR, a Motorola (GI) cable box, and a Toshiba DVD player. To control devices other than the default brands, perform the following steps; otherwise skip this section: NOTE: For TV/VCR Combo control, see the next section. 4. Aim the remote control at the device and press POWER once. If the device does not respond, repeat steps 2-3, trying each code for your brand until you find one that works. If it still does not work, try Searching For Your Code. NOTE: If the device does not have a POWER key, press the (PLAY) key. 5. Repeat step 4 three more times for remaining digits. Use 2 for the second digit, 3 for the third digit, and 4 for the fourth digit. To check for codes of other devices, repeat steps 1 through 5, but substitute the appropriate device key for each device you are checking. As before, write down each fourdigit code. SOLUTION: If original remote control required pressing ENTER to change channels, press ENTER on the remote control after entering the channel number. PROBLEM: Tried "Search Method" and still could not find a working code. Unlocking Volume Control: NOTE: Perform these instructions when you want independent volume control for each programmed device (e. g. , TV volume control in TV mode, CBL/SAT volume control in CBL/SAT mode, etc. ) USER'S GUIDE INTRODUCTION The One For All 3 Devices Universal Remote Control is designed to operate three home entertainment devices, depending on the model purchased (see Key Charts, Mode Keys on the right). The remote control requires four fresh AAA alkaline batteries (not included) and easy programming to control your devices. For best results, please read and perform all instructions listed here. Also, keep these instructions for future reference. When controlling a DVD player, use SKIP FORWARD to next DVD chapter. , use SKIP REVERSE to the last DVD chapter. Press SHIFT and use the Up/Down/Left Right cursor keys to move the cursor in the program guide and menu screens. Press SHIFT and MUTE to select a menu item. Press SLEEP to activate your device's sleep timer (not available for all devices). Use the transport keys to control your VCR, CD or DVD player, or VOD. To record a program, press the record key (REC) twice. use TV/VID to switch the TV's input to view TV or video program. 1. Turn on a device (e. g. , VCR) and, if applicable, insert media, (e. g. , cassette or disc). NOTE: Please read steps 2-4 completely before proceeding. [. . . ] One For All® 3 Devices is compatibile for use in North America excluding Mexico. URC-3300N/3330 12/01 PROBLEM: Key Charts Use SET for all programming sequences. The LED (red light) blinks to show that the remote control is working and is sending signals. Press POWER once to turn on or off the selected device. LED does not blink when you press a key. LIFETIME WARRANTY One For ALL ("OFA") warrants this product to be free from defects in materials and workmanship, under normal use, throughout the period of the product's ownership by the original purchaser. [. . . ]