User manual ONE FOR ALL KAMELEON 4

[. . . ] TABLE OF CONTENTS English ABOUT YOUR KAMELEON 4 . 3 · "EL" Screen activation setting . 3 (Activation by movement or keypress) · "EL" Screen brightness adjustment . 5 SET UP SETTING UP THE KAMELEON 4 . [. . . ] Place the KAMELEON 4 and your original remote control on a flat surface. Make sure the ends which you normally point at your device are facing each other. Point the original remote to the front left side of the KAMELEON 4 (see picture below). Keep the remotes at a distance of 2 to 5 cm (0. 8 to 2 inches). 2 Press and hold down the MAGIC key (for about 3 seconds) until the rabbit comes out of the hat. The bottom part of the animated IR Indicator will blink twice. Press the device key (Example: TV key) on the KAMELEON 4 remote to select the mode to which you want to copy the learned function. Press the key (Example: "16:9" key) on the KAMELEON 4 remote where you want to place the learned function. The IR Indicator will show "incoming IR" three times and then the display will switch off. Press and hold the key that you want to copy (Example: mono/stereo) on your original remote control. The display switches back on and you will see two blinks to indicate successful learning operation. 3. 4. 5. 6. 7. If you want to copy other functions within the same mode, simply repeat steps 5 and 6 pressing the next key you want to copy by learning. If your want to copy another function in a different mode, simply continue with step 4 followed by steps 5 and 6. To exit the learning mode, press and hold down the MAGIC key (for about 3 seconds) until the bottom part of IR Indicator blinks four times. WWW. ONEFORALL. COM 11 Learning Feature As soon as the display switches off in step 5 you need to press the key (in this example: the "mono/stereo" key) on your original remote within 10 seconds. If no key is pressed while in learning mode, the remote will return to user mode after 30 seconds. During learning, keys such as (TV) menu, (VCR) menu etc. If you learn a function on a key, the original KAMELEON 4 function automatically becomes shifted. Press the MAGIC key then the key to access it (this excludes the POWER, Channel and Volume keys). If you learned on a digit key, access the original function by pressing magic twice and then the digit. If you want to learn a function on a key that is not in the main screen, use the SCREEN key to change the screen. Therefore you can place one learned function per mode on the same key. The KAMELEON 4 can learn approximately 30 functions. This depends on the other programmed functions and on the remote to be learned from. [. . . ] You can also visit our website (www. oneforall. com) to find an answer to your questions. Once you obtain(ed) your function code(s) from customer service, programming the code is easy: 1. Press the device key (TV, VCR, SAT/CBL or DVD). Press and hold the MAGIC key until the rabbit comes out of the hat. [. . . ]