User manual ONE FOR ALL KAMELEON 6

[. . . ] TABLE OF CONTENTS English ABOUT YOUR KAMELEON 6 . 3 - 9 · "EL" Screen activation setting . 3 (Activation by touching screen and remote simultaneously and/or by keypress) · "EL" Screen brightness adjustment . 3 · "EL" On time setting . [. . . ] The IR Indicator will show "incoming IR" three times and then the display will switch off. Press and hold the key that you want to copy (Example: mono/stereo) on your original remote control. The display switches back on and you will see two blinks to indicate successful learning operation. If you want to copy other functions within the same mode, simply repeat steps 5 and 6 pressing the next key you want to copy by learning. If you want to copy another function in a different mode, simply continue with step 4 followed by steps 5 and 6. To exit the learning mode and return to the user screen, press the ESC key twice. (x2) 5. 6. 7. 8. WWW. ONEFORALL. COM 13 Learning Feature As soon as the display switches off in step 5 you need to press the key (in this example: the "mono/stereo" key) on your original remote within 10 seconds. If no key is pressed while in learning mode, the remote will return to user mode after 30 seconds. During learning, keys such as (TV) menu, (VCR) menu etc. If you learn a function on a key, the original KAMELEON 6 function automatically becomes shifted. Press the MAGIC key then the key to access it (this excludes the POWER, Channel and Volume keys). If you learned on a digit key, access the original function by pressing magic twice and then the digit. If you want to learn a function on a key that is not in the main screen, use the SCROLL key to change the screen. Therefore you can place one learned function per mode on the same key. The KAMELEON 6 can learn approximately 30 functions. The amount of keys depends on the other programmed functions and on the remote to be learned from. You can replace a learned function by placing another learned function on top. Please make sure not to use the learning procedure when in direct sunlight or under incandescent lights. Make sure you are using new batteries before following the learning instructions above. Upon changing the batteries, your learned functions will be retained. - - - Shifted Learning It is also possible to place a function shifted on a key to maintain the original function. Example: to place the mono/stereo function shifted on the "red" key. mono/stereo) function shifted on the red key, simply follow steps 1-8 on page 13, only press "MAGIC" then the "red" key (instead of "A") during step 5. [. . . ] Press the key to which the function will be assigned (if this key is located in a different screen than the main screen, use the SCROLL key to access the screen). The IR Indicator will blink twice and the screen will return to the Setup screen. Key Magic® functions are mode specific. To access the function you have programmed, press the device key first. [. . . ]