User manual ONE FOR ALL SV 1725

[. . . ] Connect the TRANSMITTER to the VCR and the RECEIVER to the TV in the bedroom. Place the IR eye on / in front of the IR receiver of the VCR. Select the mode on the TV for "Line In" (AV, EXT or channel 0). You can take the remote of your VCR to your bedroom to control your TV channels tuned in your VCR. [. . . ] · Picture of selected TV channel disappears (snow-picture). - Disable the auto standby mode of the VCR (check the manual of the VCR how to do this). · The picture on your second TV is not correct. - Select "EXT" or "AV" on second TV. - Make sure that the video source is switched on. · Using a remote control, you cannot control the video source from your second TV. - Aim the remote control directly at the RECEIVER unit and ensure that there are no obstacles in between. - Ensure that there is no other wireless device (wireless headphones, speakers, RF control signals) interfering with the remote control. - Make sure that TRANSMITTER and RECEIVER are more than 16 ft (5 m) apart. - Make sure to use the remote control of the video source. - Reposition the IR Eye 2 - 4 inch (5 - 10 cm) in front of the video source(s). · Buzzing sound when using the remote control - With some types of TV you will not be able to solve this problem. · S-VHS video shows no colour pictures (only black and white). - Select CVBS video output format for your S-VHS VCR · DVD player gives no pictures on either main- or second TV. - Select CVBS video output format for your DVD player (check the DVD player's user manual. Guarantee : UNIVERSAL ELECTRONICS / ONE FOR ALL warrants to the original purchaser that this product will be free from defects in materials and workmanship under normal and correct use for a period of one (1) year from the date of original purchase. This product will be repaired or if necessary replaced free of charge if it has been proven to be defective within the one (1) year warranty period. The forwarding costs are on the account of the owner; the costs of returning the product are on the account of UNIVERSAL ELECTRONICS / ONE FOR ALL. This warranty does not cover damage or failures caused by products or services not supplied by UNIVERSAL ELECTRONICS / ONE FOR ALL, or which result from not mounting the product according to manual instructions. This also applies when the product has been modified / repaired by others than UNIVERSAL ELECTRONICS / ONE FOR ALL or if a fault is the result from accident, misuse, abuse, neglect, mishandling, misapplication, faulty installation, improper maintenance, alteration, modifications, fire, water, lightning, natural disasters, wrong use or carelessness. To obtain warranty service during the warranty period, please notice that we need your original purchase receipt so that we may establish your eligibility for service. If you have bought this product for purposes which are not related to your trade, business or profession, please remind that you may have legal rights under your national legislation governing the sale of consumer goods. This guarantee does not affect those rights. Universal Electronics BV Europe & International P. O. [. . . ] Secondly the RECEIVER has a built in remote control extender. When an infra red signal is Received by the RECEIVER, it will transform the IR command to 433. 92 MHz and can be sent through walls and ceilings. Please note that this feature is only accessible for devices that are controlled via IR (infra-red) signals at a frequency of 30 - 60 kHz This feature does not support the 2-way IRDA waveform. If you are unsure of the details of the remote control (IR) output, please refer to the manual of the original device or contact your cable supplier. CBL / SAT TRANSMITTER Now, insert the adapter plug into the connector on the backside. 4 RECEIVER 4 Connecting the RECEIVER unit Use the AV cable labeled "RECEIVER" to Connect the RECEIVER UNIT to the destination devic (e. g. [. . . ]