User manual ONE FOR ALL SV-9125

[. . . ] Match the batteries to the (+) and (­) marks inside the battery case, then insert the batteries. Replace the battery cover by pushing downwards and allowing it to click back into position. - In order to avoid having to re-program your ONE FOR ALL 1 after you remove the batteries, you will need to insert new batteries within 5 minutes. Also it is recommended that you do not use rechargeable batteries. [. . . ] Channel Up / Down Control: These keys control the same functions as your original remote control. Mute Key: The Mute key operates the same function it did on your original remote. Volume Up / Down Control: These keys operate just as those on your original remote. Directional Keys If available on your original remote, these keys will allow you to navigate through the menu of your device. OK key If your original remote control required that you press an "OK" or "ENTER" key during Menu operation, this key can be used for this function. 5 6 7 8 9 10 WWW. ONEFORALL. COM 4 The Keypad 11 12 13 Menu Key: Controls the same function as it did on your original remote control. Exit Key: The Exit key will exit the Menu. 16:9 key This key allows you to access the wide screen (16:9) view option of your television (if available on your original remote). Teletext Functions: These keys are used to operate the main Teletext functions. TEXT ON: HOLD/STOP: EXPAND: Puts your television in the teletext mode. Stops the television changing text pages. Shows the top half of the teletext page in larger letters. To search for your television code: 1. 2. Switch your television on (not in standby). Press and hold down MAGIC until the ONE FOR ALL 1 red light blinks twice (the red light will blink once then twice). Aim the ONE FOR ALL 1 at your Television. Now press CH+ over and over, until your Television turns off (every time you press the CH+ key the ONE FOR ALL 1 will send out a POWER signal from the next code contained in the memory). You may have to press this key many times (up to 150 times) so please be patient. If you skip past a code, you can go to the previous code(s) by pressing the CH- key. Remember to keep pointing the ONE FOR ALL 1 at your Television while pressing this key. 3. 5. CH 6. As soon as your television turns off, press MAGIC to store the code. - Most TV's do not switch on pressing the POWER key. Please try pressing a "number" key or the "TV-text off" key to switch your TV back on. - If you cannot control your Television properly, please continue the Search Method, you may be using the wrong Code. WWW. ONEFORALL. COM 7 Code blink out (To find out which code is currently programmed) Once you have Set-Up your ONE FOR ALL 1, you can blink back your Set-up Code for future reference. [. . . ] If there are no blinks, the digit is , , 0". For the fourth digit of your four-digit code, press 4 and count all the red blinks. If there are no blinks, the digit is , , 0". Now you have your four-digit code. 2. [. . . ]