User manual ONE FOR ALL SV-9153

[. . . ] You can choose any combination of six devices you would like to operate. Also, what makes the ONE FOR ALL 6 even more unique is the "Learning" feature, which allows you to customise any of the special functions of your original remote control onto the keypad of your new ONE FOR ALL 6. The following pages explain in simple steps how to customise the ONE FOR ALL 6 to your home entertainment needs. 2 WWW. ONEFORALL. COM 2 1 4 5 3 6 7 8 10 9 11 12/13 14 WWW. ONEFORALL. COM 3 Installing the Batteries Your ONE FOR ALL 6 needs 2 new "AA/LR6" alkaline batteries. 1 2 3 Remove the battery cover from the back of your ONE FOR ALL 6 by pressing down on the tab. [. . . ] Then press the A key to which the Macro will be assigned. Next press TV, POWER, VCR, POWER, SAT, POWER. To store the Macro, press and hold MAGIC until the device key blinks twice (the device key will blink once then twice). Whenever you press the A key, the ONE FOR ALL 6 will turn off your TV, VCR and Satellite. 2 3 4 5 6 · To erase the Macro from the A key, press: MAGIC* 995 A key MAGIC* *Here you must hold down MAGIC until the device key blinks twice. Note: Each MACRO can consist of a maximum of 15 key strokes. Shifted Macros You can install a Shifted Macro on any key, except for the device keys (TV, VCR, SAT, CD, AUD and DVD), the MAGIC key, the Home theater key and the NUMBER keys. If for example, you want to program a shifted Macro on the POWER key, simply press MAGIC once then the POWER key during step 3. Now everytime you press MAGIC, then the POWER key, the ONE FOR ALL will turn off your TV, VCR or Satellite. · To erase the Shifted Macro from the POWER key press: MAGIC* 995 MAGIC POWER key MAGIC* * Here you must hold down MAGIC until the device key blinks twice. Notes: - Make sure that you program a Macro on a spare key that you don't use in any mode. - Once you program a Macro on a specific key, the sequence will work regardless of the mode (TV, VCR, SAT, CD, AUD or DVD) you are using. - To avoid accidental recordings with the ONE FOR ALL 6, you must press the Record key twice to begin recording. Because of this, you cannot assign a Macro or Shifted Macro to the Record key. - If you had to hold down a key for a few seconds on the original remote control to get a function, this function may not work in a macro on your ONE FOR ALL remote. The "custom keys" are an ideal location for this. A Shifted Learning function can also be put on any key EXCEPT for the following: Device keys, MAGIC key, Number keys. To install a Shifted Learning function, simply follow steps 1-8 on the previous page. During step 5, press MAGIC once before you press the key where you are placing the learned function. To access the shifted function, press MAGIC and then the key you have learned on. To delete a learned function: 1 Press and hold MAGIC until the device key blinks twice (the device key will blink once then twice). Press 9 7 6 (the device key will blink twice). Press the device key in which the function will be deleted. Press twice on the learned key which will be deleted (the device key will blink twice). * If there is another key which you wish to delete, repeat steps 1-4. The original functions of the ONE FOR ALL 6 will now be present. 2 3 4 5 6 * To delete a Shifted Learned feature, press MAGIC before you press the learned key to be deleted (during step 4). To delete all learned functions across all modes: 1 2 Press and hold MAGIC until the device key blinks twice (will blink once then twice). Press 9 8 0 (the device key will blink four times). Notes: - During steps 2-7 (page 13), you have approximately 10 seconds to conduct each step. If there is a gap of more than 10 seconds between two steps, you will have to start again from step number 2. [. . . ] * Excluye unos pocos modelos de la serie LX, LS y MX modelos. * Exclui alguns modelos da série LX, LS y MX. * Sono esclusi modelli della serie LX, LS e MX. * Exclusief een paar modellen in de LX, MX en LS serie. [. . . ]