User manual ONE FOR ALL SV-9322

[. . . ] 34 Programming A Master Power Key With Instant Channel Selection. 49 Restoring Factory Default Settings. 52 Setting Up The IR/RF Command Center . 52 Adding The IR Signal Extension Cord . [. . . ] The Customer Support representative will search our entire database for a code that matches your device and instruct you how to enter it into your SV-9322 remote control. If the code for your home entertainment or home automation device is not in our database, we will need to "capture" the code for that device from its original remote control. A new code would then be created and entered into your SV-9322 remote control. If necessary, the Customer Support representative can instruct you how to begin the capture procedure. NOTE: One For All reserves the right to replace a returned remote control with a new one of equal or superior functionality. Upgrade Exclusions · Home entertainment or home automation devices controlled by radio frequency (RF/UHF), wired, or ultrasonic remote controls. Only devices controlled by infrared remote controls are covered. · Home entertainment or home automation devices not controlled by remote controls. · Products that operate over 100 kHz. · Infrared keyboards and infrared pointing devices (such as mouse substitutes). · All products for sale and/or use outside the continental United States, Hawaii, Alaska, or Canada. 51 Producer 2002 RF Mnl 4/4/02 10:17 AM Page 52 USING THE IR/RF COMMAND CENTER The One For All IR/RF LCD 8-Device With Learning Universal Remote Control (SV-9322) comes with an IR/RF Command Center which receives radio-frequency (RF) signals from the SV-9322 remote control, anywhere in your home, up to 100 feet away. Once it is set up, the IR/RF Command Center will convert the RF signals into Infrared (IR) signals to control your home theater devices. NOTE: The SV-9322 remote control transmits both an IR and an RF signal simultaneously. It is your option whether you want to install the IR/RF Command Center for extended remote control range. If you choose to do so, during testing do not aim the SV-9322 remote control at your home entertainment devices to verify that RF transmission is working. Actual signal distance will be based on the construction of the building the unit is being used in, as well as other factors, such as outside interference. SPECIFICATIONS Remote Control Power . 120 Vac Remote Control to IR/RF Console Range . 100 Feet (30. 48 m) IR/RF Command Console to Device Range. 25 Feet (7. 62 m) ± 30° Remote Control Dimensions (H x W x D). 232 x 65 x 31 mm IR/RF Command Console Dimensions (H x W x D) . 39. 7 x 128. 6 x 101. 6 mm Remote Control Weight (without Batteries) . 8 oz (220 g) IR/RF Command Console Weight . 10. 4 oz (300 g) NOTE: Specifications are typical. Specifications are subject to change and improvement without notice. 54 Producer 2002 RF Mnl 4/4/02 10:17 AM Page 55 TROUBLESHOOTING PROBLEM: SOLUTION: PROBLEM: SOLUTION: LCD (Liquid Crystal Display) begins to fade, does not appear, or the LOW BATTERY ( )icon appears. Replace the batteries with four (4) new AAA alkaline batteries (see page 4). LED (red light) and IR ( ) icon blinks when you press a key, but home entertainment device does not respond. [. . . ] Use MOVE to move the window picture to different positions in the main picture. Use SWAP to switch images and sound between the main and window pictures. 76 Use to turn on or off the key backlight. When this feature is activated, keys will remain backlit for 5 seconds after the last key press. In the setup mode, backlighting will remain on for 30 seconds. [. . . ]