User manual ONE FOR ALL SV-9380

[. . . ] Your ONE FOR ALL 4 can operate four devices: a Television, a Video Recorder, a DVD Player and a Satellite Receiver or Cable Converter. 2 WWW. ONEFORALL. COM 2 1 3 4 5 6 7 9 8 10 11 12 13 15/16 14 WWW. ONEFORALL. COM 3 Batteries Your ONE FOR ALL 4 Remote needs 2 new "AA/LR6" Alkaline batteries. Push the battery door upwards and lift it up to remove it. Match the batteries to the (+) and (­) marks inside the battery case, then insert the batteries. Replace the battery cover by pushing downwards and allowing it to click back into position. [. . . ] In VCR mode the SP/LP key controls the tape speed function, the AUTO key controls the auto tracking function, just like on your original remote. Teletext Functions: After pressing the TV key, the transport keys (REW, PLAY, FF, PAUSE) are used to operate the main Teletext functions. The symbols below the keys are for Teletext. The text keys are used to access the Teletext functions of your television. Of course, your television must have Teletext capability. TEXT ON: HOLD/STOP: EXPAND: Puts your television in the teletext mode. Stops the television changing text pages. Shows the top half of the teletext page in larger letters. By pressing again, you can see the bottom half of the teletext page enlarged. To return to the regular teletext viewing, press the Expand key again, or press the Text key, depending on your television. Switches the television back to regular viewing mode. --> If your brand is not listed at all. The Search Method allows you to scan through all the codes contained in the memory of the ONE FOR ALL 4. Example: To search for your television code: 1. 3. Switch your television on (not in standby). Press and hold down MAGIC until the ONE FOR ALL 4 red light blinks twice (the red light will blink once then twice). Aim the ONE FOR ALL 4 at your Television. Now press CH+ over and over, until your Television turns off (every time you press the CH+ key the ONE FOR ALL 4 will send out a POWER signal from the next code contained in the memory). You may have to press this key many times (up to 150 times) so please be patient. If you skip past a code, you can go to the previous code(s) by pressing the CH- key. Remember to keep pointing the ONE FOR ALL 4 at your Television while pressing this key. 4. 6. CH 7. As soon as your television turns off, press MAGIC to store the code. - Most TV's do not switch on pressing the POWER key. [. . . ] 2 if you like to program a second TV on the SAT key. 3 if you like to program a second VCR on the SAT key. Example 1: To program a second Television on the DVD key (for example), you need to change the DVD key into a TV key, so press: (*) The DVD key has now become a second TV key. Now enter the Set-Up code for your second TV by pressing: (*) Example 2: To program a second Television on the SAT key (for example), you need to change the SAT key into a TV key, so press: (*) The SAT key has now become a second TV key. Now enter the Set-Up code for your second TV by pressing: (*) (**) (**) ____ (TV code) (**) ____ (TV code) (**) Example 3: To program a second Video Recorder on the SAT key (for example), you need to change the SAT key into a VCR key, so press: (*) The SAT key has now become a second VCR key. [. . . ]