User manual ONE FOR ALL URC 6960

[. . . ] If it still does not work, try Searching For Your Code. NOTE: If the device does not have a POWER key, press the (Play) key. 3. To view the code for the first digit, press 1 once. Wait 3 seconds, count the LED blinks (e. g. , three blinks = 3) and write down the number. NOTE: If a code digit is "0", the LED will not blink. USING A MACRO With programming, the MACRO key on your One For All 8 Device Home Theater Universal Remote Control can be setup to perform a repetitive, time-consuming operation for easy, convenient access through the press of a single key. A macro can be used to control a home theater operation, to set a favorite channel, or for other multiple functions you would like to control with one key press (see examples below). Moreover, the MACRO key can hold up to 15 key presses total. NOTE: Programming a new macro over an existing one will erase the original macro. 4. [. . . ] Use MOVE to move the window picture to different positions in the main picture. Use SWAP to switch images and sound between the main and window pictures. Press SLEEP to activate your device's sleep timer (not available for all devices). Use to turn on or off the key backlight. When this feature is activated, keys will remain backlight for 5 seconds after the last key press. Use SET for all programming sequences. Example ­ Programming A Master Power Key With Instant Channel Selection A macro can be programmed to turn on and off your equipment as well. For example, let's set up a sequence that will turn on the TV and tune it to channel 3, and then turn on the Cable Box and tune it to a premium channel (e. g. , 11). NOTE: This example assumes all equipment is turned off and that the TV is connected through the cable box with TV tuning set to channel 3. ABOUT UPGRADING The One For All 8 Device Home Theater Universal Remote Control has the largest infrared code library available. However, if you purchase a brand new home entertainment or home automation device, it may not respond to the codes stored in the remote control's memory. If this happens, please contact our Customer Support department (see Customer Support below) to upgrade the remote control. The Customer Support representative will search our entire database for a code that matches your device and instruct you how to enter it into your One For All 8 Device Home Theater Universal Remote Control. If the code for your home entertainment or home automation device is not in our database, we will need to "capture" the code for that device from its original remote control. This action will assign the entire group of PIP Controls (i. e. , PIP, MOVE, and SWAP) to the TV. To exit Home Theater programming, press and hold SET until the LED (red light) blinks twice, then release SET. Key Charts The LED (red light) blinks to show that the remote control is working and is sending signals. Press TV, VCR, DVD, AUX, SAT, CBL, RCVR/AMP, or CD once to select a desired home entertainment device to control. After programming, press HOME THEATER once to select the home theater mode (see Using The Home Theater Mode). Press POWER once to turn on or off the selected device. Press MENU once to display your selected device's main menu. Use GUIDE to display your selected device's program guide or setup menu. Use EXIT to exit from your selected device's guide or menu. Use INFO to display the current channel and program information. RROUND SOUND 5. Then enter the following sequence: CBL, POWER, and 1-1 (or 0 -1- 1 if access is over 100 channels) 6. Press and hold SET until the LED blinks twice, then release SET. [. . . ] Copyright 2002 by Universal Electronics Inc. No part of this publication may be reproduced, transmitted, transcribed, stored in any retrieval system, or translated to any language, in any form or by any means, electronic, mechanical, magnetic, optical, manual, or otherwise, without the prior written permission of Universal Electronics Inc. The One For All® 8 Device Universal Remote Control is compatibile for use in North America, excluding Mexico. URC-8011 02/02 SU Use the cursor keys to move the cursor in the program guide and menu screens. Use SELECT to choose options from your selected device's menu or guide. [. . . ]