User manual ONE FOR ALL URC 3410

[. . . ] POWER Key The Power key controls the same function as it did on your original remote. Device Key Pressing the TV key allows the remote to control the functions of your Television. Number Keys The Number keys (0-9, 10, 20 (AV)) provide functions just like your original remote, such as direct access programme selection. If your original remote uses one/two digit input switching (-/-- symbol), this function can be obtained by pressing the -/-- key, which is the same as the 10 key. [. . . ] 9 10 After accessing the text mode, the bottom row of the keys marked red, green, yellow and blue, allow you to access the Fastext functions of your television. If on your original remote control these keys are used for Menu navigation, the ONE FOR ALL Fastext keys may operate in the same way. Important note: For a more detailed explanation of Teletext and Fastext, please refer to the manual of your television. Remember, different televisions control Teletext and Fastext features in different ways. Not all of the Teletext functions may be available for your particular model. COM 5 705010_4515_E-10:ecoline 1_Rubber zonder grieks 13-03-2007 00:49 Setting up the ONE FOR ALL Before you start, please read these instructions carefully Direct code set up To set up the ONE FOR ALL for your television: 1 Acura al Admir n Adyso Agazi AGB Agef Aiko ALL FOR ONE 3, 041 0009 0093, 036 0087, 0216 0217, 0264 0516 7, 0 0087 0009, 003 0216, 0274 1, 0037, 0208, 037 0361, Find the code for your device in the Code list (page 73 - 81). Make sure your device is switched on (not on standby). Press the TV key on the ONE FOR ALL Press and hold down MAGIC until the red light blinks twice. (The red light will blink once and then twice. ) 2 3 4 ____ Enter your (four-digit device code) using the number keys. Now, aim the ONE FOR ALL at your device and press POWER. 2 3 5 8 4 5 6 0 SLOW REC 7 Once you have Set-Up your ONE FOR ALL, you can blink back your SET-UP CODE for future reference. example: To blink out your Television code: 1 2 Press TV once. Press and hold MAGIC until the red light blinks twice (The red light will blink once and then twice). For the first digit of your four-digit code, press 1 and count all the red blinks. If there are no blinks, the digit is "0". For the second digit, press 2 and count all the red blinks. If there are no blinks, the digit is "0". For the third digit, press 3 and count all the red blinks. If there are no blinks, the digit is "0". For the fourth digit, press 4 and count all the red blinks. If there are no blinks, the digit is "0". [. . . ] Com Our internet-site has many advantages: - 24 hours access - no waiting time - page for Frequently Asked Questions - info about the ONE FOR ALL product range Before contacting us, by Fax, E-mail or Phone, make sure you have the required information available by filling in the table below. What do we need to know before you contact us: 1 2 3 Device TV That you have the ONE FOR ALL 1 URC-3415 universal remote. A list of your equipment/models: (see example below). RM-883 SET-UP code 1505 (example) Type/model numbers can often be found in your equipment owner’s manual or on the factory plate behind the device. [. . . ]