User manual ONE FOR ALL URC-3415

[. . . ] Please write down your code for easy, future reference. The Keypad See picture of ONE FOR ALL TV remote on page 3 1 2 3 4 5 LED The LED (Light Emitting Diode) flashes red to show the remote is working. MAGIC Key The MAGIC key is used to set up your ONE FOR ALL. MENU Key The MENU key controls the same function as it did on your original remote. POWER Key The Power key controls the same function as it did on your original remote. [. . . ] By pressing again, you can see the bottom half of the Teletext page enlarged. To return to regular Teletext viewing, press the EXPAND key again, or press the TEXT ON key, depending on your television. 9 10 After accessing the text mode, the bottom row of the keys marked red, green, yellow and blue, allow you to access the Fastext functions of your television. If on your original remote control these keys are used for Menu navigation, the ONE FOR ALL Fastext keys may operate in the same way. Important note: For a more detailed explanation of Teletext and Fastext, please refer to the manual of your television. Remember, different televisions control Teletext and Fastext features in different ways. Not all of the Teletext functions may be available for your particular model. WWW. ONEFORALL. COM 5 Setting up the ONE FOR ALL Before you start, please read these instructions carefully Direct code set up To set up the ONE FOR ALL for your television: 1 Acura al Admir n Adyso Agazi AGB Agef Aiko A FOR ONE 3, 041 0009 0093, 036 0087, 0216 0217, 0264 0516 7, 0 0087 0009, 003 0216, 0274 1 0037, 0208, 037 0361, Find the code for your device in the Code list (page 9 - 17). Make sure your device is switched on (not on standby). Press the TV key on the ONE FOR ALL Press and hold down MAGIC until the red light blinks twice. (The red light will blink once and then twice. ) Enter your (four-digit device code) using the number keys. Now, aim the ONE FOR ALL at your device and press POWER. If your device switches off, the ONE FOR ALL is ready to operate your device. 2 3 TV MAGIC 4 ____ 5 6 Turn your device back on and try all the remote's functions to ensure they are working properly. If the functions do not work properly, repeat steps 1-5 using another code listed under your brand. If your device does not respond, follow steps 1 to 5 with each code listed for your brand. If none of the codes listed for your brand operate your device, or if your brand is not listed at all, try the search method described on page 7. Write your code in the four boxes provided in the battery compartment and on page 8 for easy future reference. 7 8 Important notes: - Most TV's do not switch on pressing the POWER key. Please try pressing a "number" key or the "TV-text off" key to switch your TV back on. If your device does not respond or is not functioning properly with one of the codes, try another code listed under your brand. 6 WWW. ONEFORALL. COM Search Method If your device does not respond to the ONE FOR ALL after you have tried all the codes listed for your brand, try searching for your code. The Search Method allows you to find the code for your device by scanning through all the codes contained in the memory of the ONE FOR ALL. The Search Method may also work if your brand is not listed at all. To search for your TV code: 1 2 3 TV Switch your television on (not on standby). Press and hold down MAGIC until the red light blinks twice (The red light will blink once and then twice). 1 MAGIC 4 5 6 9 9 Press 9 9 1. Now press CH+ over and over, until your Television turns off (everytime you press the CH+ key the ONE FOR ALL will send out a POWER signal from the next code contained in the memory). You may have to press this key many times (up to 150 times) so please be patient. [. . . ] Now you have your four-digit code. 1 5 2 6 3 7 4 WWW. ONEFORALL. COM 7 Quick Code Reference Write down the code for your device in the boxes below and in the battery compartment for quick and easy reference. Brand 1. _________________________ ssss Solution: Try the search method on page 7. Code Problem & Solution Problem: Your brand is not listed in the code section?The ONE FOR ALL does not operate your device ?The ONE FOR ALL is not performing commands properly? A) Try all the codes listed for your brand. [. . . ]