User manual ONE FOR ALL URC-6010

[. . . ] It is also used to activate the Scan feature (see page 9). Volume +/-, Programme +/The Volume and Programme keys operate just as those on your original remote control. These keys are also used to program the ZAPPER for your television and to control the Colour and Brightness settings of your television (see page 9). 4 5 6 WWW. ONEFORALL. COM 4 Setting Up The ZAPPER Direct Set-Up To set up the ZAPPER for your Television follow the instructions below. To set up your Television: 1 Acura al Admir n Adyso Agazi AGB Aiko ALL FOR ONE 13 11132 12242 233 12224 14232 21131 22 31121 11132 113 31 14231 11314 121 22414 13444 22332 Find your Television code in the Set-Up Code section (page 59-68). [. . . ] For the fourth digit, press Programme(-) and count the red blinks. For the fifth digit, press MUTE and count the red blinks. ) 4 5 6 7 Write the code for your TV in the boxes provided on page 6 and inside the battery compartment for easy future reference. 8 WWW. ONEFORALL. COM Advanced Operation Controlling Colour & Brightness Depending on the functions of your original remote control, the ZAPPER can operate the colour and brightness settings of your Television. Colour up = Press then hold Colour down = Press then hold Brightness up = Press then hold Brightness down = Press then hold Note: You have 5 seconds to press the Volume or Channel keys for colour or brightness adjustment after pressing MAGIC. Scan Your ZAPPER comes with a special Scan function which lets you "scan" through every programme available on your TV. To scan the programmes on your TV: 1 Aim the ZAPPER at your TV. Press and release MAGIC then press the MUTE key. The ZAPPER will send the command to advance through all the programmes available on your Television stopping at each programme for about three seconds. Remember, you must aim the ZAPPER at your device the entire time you are using scan. 2 When you find a programme you would like to watch, simply press any key to stop the Scan feature. Important note: Scan may not function with a television that did not have a programme +/- key on the original remote. WWW. ONEFORALL. COM 9 Trouble-Shooting Helpful Hints Problem: Your brand is not listed in the ONE FOR ALL code section?The ONE FOR ALL does not operate your television?Solution: Try the search method. A) Try all the codes listed for your brand. Try Direct Set-Up again trying each code listed under your brand or start the search method over again to locate the proper code. Press MAGIC until the light blinks twice. Then press: (CH-), (CH+), (CH-). The ONE FOR ALL is not performing commands properly? Your TV switches to programme 1 when you press the Power key before switching off OR you must press Power twice to switch on your TV?You cannot reach channel 10 and above on your TV. If your original remote did not have channel +/- keys, the ZAPPER may not operate this function. Make sure you are using new batteries and are aiming the ONE FOR ALL at your device. Replace batteries with 2 new "AAA/LR03" alkaline batteries. The ONE FOR ALL does not respond after pressing a key?LED does not blink when you press a key? 10 WWW. ONEFORALL. COM Televisions Fernseher Téléviseurs Televisores Televisões Televisori Televisies A. R. * Ausschließlich einige Modelle der LX, LS und MX Serie. * Exclut quelques modèles de la serie LX, LS et MX. * Excluye unos pocos modelos de la serie LX, LS y MX modelos. * Exclui alguns modelos da série LX, LS y MX. [. . . ] Diese Garantie erstreckt sich nicht auf Verpackungen, T ransportbehältnisse, Batterien, zerbrochene oder beschädigte Gehäuse oder ander Objekte, die in Verbindung mit dem Produkt verwendet werden. Jegliche weitere Verpflichtung als die oben aufgeführte wird ausgeschlossen. Bitte beachten Sie, dass wir Ihren Kaufbeleg brauchen un fest zu stellen ob Sie Anspruch auf unseren Garantieservice erheben können. GARANTIE F UNIVERSAL ELECTRONICS INC. /ONE FOR ALL garantit à l'acheteur d'origine que ce produit est certifié franc de défauts matériels et de main d'oeuvre durant une période d'un (1) an à partir de la date d'achat original à la condition exclusive que ce produit ait été utilisé de manière normale et correcte. [. . . ]