User manual ONE FOR ALL URC-6200

[. . . ] The TV, VCR, DVD/LD, RCVR, DVD/LD, RCVR, CD OR CABLE/SAT, CD and CABLE/ SAT keys are used to select the home entertainment component you want to control. If your component does not respond when you press a key on the remote control, press the appropriate device key (TV, VCR, DVD/LD, RCVR, DVD/LD, RCVR, CD OR CABLE/SAT, CD or CABLE/SAT) first to tell the remote control which component you would like the remote to operate. URC 6200 Cinema 6+ User Guide FEATURES AND FUNCTIONS Here are the features and functions of the Cinema 6 universal remote control. Use the drawing to locate each feature of the remote, then refer to the chart for a description of what function each feature performs. The VOLv (Volume Up), VOLw (Volume Down) and MUTE keys control the volume the same as the Volume Up and Down and Mute keys on your original remote. The CHv (Channel Up) and CHw (Channel Down) keys change channels the same as the Channel Up and Down keys on your original remote. The CHv/w keys also control the following functions in other modes: DVD/LD mode = Skip Forward/ Skip Reverse, RCVR, and CD mode = Preset Up/Preset Down. 0-9 The Digit keys (0-9) control direct channel access the same as the Digit keys on your original remote. [. . . ] If you perform this procedure correctly, the red light will blink twice when you enter the final digit of your code. Aim the Cinema 6 at your CD Player and press PL (Play). If your CD Player does not respond, repeat steps 24, trying each code listed for your brand until you find the one that operates your CD Player. Your Cinema 6 is now programmed to operate your CD Player. Write your CD Player code in the boxes to the left for future reference. Yorx 0195 Setup Codes For CD Players Aiwa 0124, 0157 Burmester 0420 California Audio Lab 0029 Carver 0157, 0179, 0437 Denon 0003 DKK 0000 Emerson 0305 Fisher 0048, 0174, 0179 Garrard 0393, 0420 Genexxa 0032, 0305 Harman/Kardon 0173 Hitachi 0032 JVC 0072 Kenwood 0028, 0037, 0048, 0190 Krell 0157 Linn 0157 LXI 0305 Magnavox 0157, 0305 Marantz 0029, 0157, 0180 MCS 0029 Mission 0157 MTC 0420 Nikko 0174 NSM 0157 Onkyo 0101 Optimus 0000, 0032, 0037, 0048, 0145, 0179, 0305, 0420, 0437, 0468 Panasonic 0029 Philips 0157 Pioneer 0032, 0468, 0244, 0305 Proton 0157 QED 0157 Quasar 0029 RCA 0764, 0053, 0179, 0305 Realistic 0179, 0180, 0420 Rotel 0157, 0420 SAE 0157 Sansui 0157, 0305 Sanyo 0179 Scott 0305 Sears 0305 Sharp 0037, 0180 Sherwood 0180 Sony 0000, 0185 Soundesign 0145 Tascam 0420 TEAC 0174, 0180, 0393, 0420 Technics 0029 Victor 0072 Wards 0157 Yamaha 0036, 0187 Programming the Cinema 6 to operate your Cable Converter or Satellite: Locate the brand name of your Cable Converter or Satellite and then write it in the space below. Cable Converter Brand: or Satellite Brand: Locate the brand name of your Cable Converter or Satellite in the "Setup Codes For Cable Converters or Satellites" section. The brands are listed in alphabetical order with the most popular codes listed first. You will use one of these codes to program your Cinema 6 to operate your Cable Converter or Satellite. To program the Cinema 6 to operate your Cable Converter or Satellite: 1. Turn on your Cable Converter or Satellite. Press and hold SETUP until the Cinema 6's red light blinks twice, then release SETUP. Enter the first four-digit Cable Converter or Satellite code listed for your brand in the "Setup Codes For Cable Converters or Satellites" section. If you perform this procedure correctly, the red light will blink twice when you enter the final digit of your code. 3. 4. 5. 3. Remember, if you want to use your Cinema 6 to operate your CD Player, press the CD key first. 4. Aim the Cinema 6 at your Cable Converter or Satellite and press POWER. Your Cable Converter or Satellite should turn off. If your Cable Converter or Satellite does not respond, repeat steps 2-4, trying each code listed for your brand until you find the one that operates your Cable Converter or Satellite. Your Cinema 6 is now programmed to operate your Cable Converter or Satellite. Write your Cable Converter or Satellite code in the boxes to the left for future reference. Programming the Cinema 6 to operate your Cable Converter or Satellite: Locate the brand name of your Cable Converter or Satellite and then write it in the space below. Cable Converter Brand: or Satellite Brand: Locate the brand name of your Cable Converter or Satellite in the "Setup Codes For Cable Converters or Satellites" section. The brands are listed in alphabetical order with the most popular codes listed first. You will use one of these codes to program your Cinema 6 to operate your Cable Converter or Satellite. To program the Cinema 6 to operate your Cable Converter or Satellite: 1. Turn on your Cable Converter or Satellite. [. . . ] Try all of the codes listed for your brand of home entertainment component in the "Set-Up Codes" section. Many set-up codes may allow some degree of operation. However, only one set-up code will work correctly with your home entertainment component. Try the VCR set-up codes for your brand. [. . . ]