User manual ONE FOR ALL URC-7510

[. . . ] URC-7510 R TV TV UK D F E P I NL Universal remote . 2 Z Table of Contents PICTURE OF ONE FOR ALL REMOTE THE KEYPAD INSTALLATION Set-Up using the barcode reader Set-Up by barcode number The Search Method Blinking back your SET-UP CODE ADVANCED FEATURES Colour, Brightness and Contrast Auto Scan Sleeptimer ONE FOR ALL Sleeptimer ONE FOR ALL Recall (Previous Channel) Key Magic TROUBLE SHOOTING Helpful Hints Customer Service 3 4 UK 6 7 8 8 9 9 9 10 10 11 11 12 Installing the Batteries Your ONE FOR ALL needs 2 new "AA/LR6" alkaline batteries. Match the batteries to the + and - marks. Press the battery cover back into place. Important notes: - In order to avoid having to reprogram your ONE FOR ALL after you remove the batteries, you will need to insert new batteries within 5 minutes. [. . . ] If some commands of the ONE FOR ALL TV remote are not operating correctly, try the search method again. You may be using the wrong SET-UP CODE. Important notes: - If you have problems reading the "Search method barcode" please replace steps 3 and 4 by entering the digits 9 9 1 instead. Blinking back your SET-UP CODE Once you have Set-Up your ONE FOR ALL TV remote, you can blink back your SET-UP CODE for future reference. 1 2 3 4 5 6 Press and hold until the ONE FOR ALL TV remote's red light blinks twice (the red light will blink once and then twice). For the first digit of your four-digit SET-UP CODE, press 1 and count all the red blinks. If there are no blinks, the digit is "0". For the second digit of your four-digit SET-UP CODE, press 2 and count all the red blinks. If there are no blinks, the digit is "0". For the third digit of your four-digit SET-UP CODE, press 3 and count all the red blinks. If there are no blinks, the digit is "0". For the fourth digit of your four-digit SET-UP CODE, press 4 and count all the red blinks. If there are no blinks, the digit is "0". Now you have your four-digit SET-UP CODE. SET-UP CODE Write down your SET-UP CODE (TV CODE) on the inside of the battery compartment for easy future reference. 8 WWW. ONEFORALL. COM Advanced Features Colour, Brightness and Contrast Depending on the functions of your original remote control, the ONE FOR ALL may operate the colour, brightness and contrast settings of your television. Colour up Colour down = Press and release MAGIC then hold Volume (+) = Press and release MAGIC then hold Volume (-) Brightness up = Press and release MAGIC then hold Channel (+) Brightness down = Press and release MAGIC then hold Channel (-) Contrast up Contrast down = Press and release MAGIC then hold Menu (up) = Press and release MAGIC then hold Menu (down) Note: You have 5 seconds to press the Volume, Channel or Menu keys after pressing MAGIC. Auto Scan Your ONE FOR ALL comes with a special Scan function which lets you scan through every channel available on your television. To scan the channels on your TV: 1 Aim the ONE FOR ALL at your TV. Press and release MAGIC then press the MUTE key. The ONE FOR ALL will send the command to advance through all the channels available on your television stopping at each channel for about three seconds. Remember, you must aim the ONE FOR ALL at your device the entire time you are using Scan. 2 When you find a channel you would like to watch, simply press any key. Note: Auto Scan may not work with devices that not have Channel +/- keys on the original remote control. Sleeptimer If your television has a "Sleeptimer" function built in, you can access this function with your ONE FOR ALL remote. To do so: 1 2 Make sure your television is switched on (not in standby). Point the ONE FOR ALL at your television and press and release MAGIC then press POWER. You should see the Sleeptimer activate on your TV screen. To increase the timer, simply press MAGIC then POWER again until the timer gets to the desired time. 3 To deactivate the Sleeptimer, repeat steps 1-3 above. Enter the second channel number exactly as you would on your original remote (e. g. [. . . ] Veuillez noter que la preuve d'achat est obligatoire afin de pouvoir déterminer votre droit à ce service. GARANTIA E UNIVERSAL ELECTRONICS/ONE FOR ALL garantiza al comprador que este producto estará libre de defectos materiales o de fabrcación, al menos durate 1 año desde la fecha actual de su adquisición , y en caso de que se utilice de un modo normal y correcto. Este producto será sustituido de forma gratuita siempre y cuando se pueda demostrar que es defectuoso y que esto haya sucedido dentro del año de garantía, corriendo a cuenta del comprador los gastos de su devolución. Esta garantia no cubre embalajes, maletines, envoltorios, pilas, armarios u otros objetos utilizados en conexión con este producto. [. . . ]