User manual ONE FOR ALL URC-7542

[. . . ] URC-7542 702075 UK D F E P I NL Universal remote ZA ON Table of Contents PICTURE OF ONE FOR ALL 4 REMOTE INSTALLING THE BATTERIES THE KEYPAD INSTALLATION Setting up your devices The Search Method USING THE AUX KEY CHANGING A DEVICE KEY QUICK CODE REFERENCE ADVANCED FEATURES Colour and Brightness Volume Punch-Through Auto Scan Device Sleeptimer The ONE FOR ALL Sleeptimer TROUBLE-SHOOTING Helpful Hints Customer Service SET-UP CODES Televisions Video Recorders Satellite Receivers Cable Converters UK 3 4 4 6 7 8 8 8 9 9 9 10 10 11 12 73 79 81 84 About Your ONE FOR ALL 4 Your ONE FOR ALL 4 Package contains: · Your ONE FOR ALL 4 Remote · Your ONE FOR ALL 4 Manual Your manual is divided into two parts: set-up instructions and device codes. You may need this guide again in the future, so please be sure to keep it. Your ONE FOR ALL 4 needs 2 new "AA/LR6" alkaline batteries. Your ONE FOR ALL 4 can operate four devices: a Television, a Video Recorder, a Satellite Receiver and a second Television, Video or Satellite Receiver. [. . . ] For the third digit, press 3 and count all the red blinks. If there are no blinks, the digit is "0". For the fourth digit, press 4 and count all the red blinks. If there are no blinks, the digit is "0". Now you have your four-digit code. 5 6 7 Make sure you write your Television code in the boxes provided in the battery compartment and on page 8 for easy future reference. Important note: To blink back the code for your other devices press the appropriate device key during step 1. WWW. ONEFORALL. COM 7 Using the AUX key Example: To program a second television on the AUX key, you need to change the AUX key into a TV key, so press: 1 (*) The AUX key has now become a second TV key. 2 Now enter the SET-UP code for your second TV by pressing: (*) _ _ _ _ (4-digit TV SET-UP code) (**) Hold down the MAGIC key until the red light blinks twice (the red light will blink once then twice). (**) (*) (**) Changing a Device Key It is possible to change any device key. Example : To program a second Video Recorder on the SAT key (for example), you need to change the SAT key into a VCR key, so press: 1 (*) The TV key has now become a second VCR key. 2 Now enter the SET-UP code for your second VCR by pressing: (*) _ _ _ _ (4-digit VCR SET-UP code)(**) Hold down the MAGIC key until the red light blinks twice (the red light will blink once then twice). (**) (*) (**) Resetting a Device Key Example: To reset the SAT key press: (*) (*) (**) (**) Hold down the MAGIC key until the red light blinks twice (the red light will blink once then twice). The red light blinks twice. Quick Code Reference Write down the codes for your devices in the boxes below and in the battery compartment for quick and easy reference. Device Type 1. _________________________ 2. _________________________ 3. _________________________ 4. _________________________ ssss ssss ssss ssss WWW. ONEFORALL. COM Code 8 Advanced Features Colour and Brightness Depending on the functions of your original remote control, the ONE FOR ALL may operate the colour and brightness settings of your television. Colour (+) Colour (-) = Press and release MAGIC then hold Volume (+) = Press and release MAGIC then hold Volume (-) Brightness (+) = Press and release MAGIC then hold Channel (+) Brightness (-) = Press and release MAGIC then hold Channel (-) Note: You have 5 seconds to press the Volume or Channel keys for colour or brightness adjustment after pressing MAGIC. Volume Punch-Through You may be able to use some features of your Television, Video Recorder, Satellite Receiver or Cable Converters at the same time. If you're watching a programme on your Video, you can adjust the volume (a TV function) without first pressing the TV key. To do so: 1 2 3 Press the device key (TV or SAT). Then, press and hold MAGIC until the red light blinks twice. It is only necessary to perform steps 1, 2 and 3 once. Now to set the timer, continue with the steps below. Setting the ONE FOR ALL Sleeptimer: It is possible to set the timer for 15, 30, 45 or 60 minutes. To do this, first make sure your TV (or Satellite) is switched on. Press the device key (TV or SAT). (:15) (:30) (:45) (:60) Now, press and release MAGIC, then press POWER. The red light will blink once which indicates the timer is set for 15 minutes. To increase the timer, simply press POWER again (this must be done within 5 seconds). [. . . ] Este producto será sustituido de forma gratuita siempre y cuando se pueda demostrar que es defectuoso y que esto haya sucedido dentro del año de garantía, corriendo a cuenta del comprador los gastos de su devolución. Esta garantia no cubre embalajes, maletines, envoltorios, pilas, armarios u otros objetos utilizados en conexión con este producto. Se excluyen otras obligciones, cualesquiera que sean, además de las mencionadas más arriba. Para obtener servicio de garantía dentro del período correspondiente a ésta, por favor, llámenos al número de teléfono que se menciona en la página de Servicio de Atención al Cliente. [. . . ]