User manual ONE FOR ALL URC-7955

[. . . ] CODE BLINK OUT (To find out which code is currently programmed) QUICK CODE REFERENCE THE LEARNING FEATURE (How to copy functions from your original working remote onto the ONE FOR ALL 5) OPERATIONAL RESET EXTRA FEATURES · Key Magic (How to program missing functions) TROUBLE-SHOOTING CUSTOMER SERVICE Your ONE FOR ALL 5 needs 2 new "AA/LR6" alkaline batteries. 1 2 3 Remove the battery cover from the back of your ONE FOR ALL 5. Match the batteries to the + and - marks inside the battery case, then insert the batteries. Power (LED) The POWER key operates the same function it did on the original remote control. [. . . ] For the third digit, press 3 and count all the red blinks. (How to copy functions from your original working remote onto the ONE FOR ALL5) Before you start: - Make sure your original remote control is working correctly. - Make sure neither your ONE FOR ALL, nor your original remote control is pointing at your device. Example: To copy the "mono/stereo" function from your original TV remote onto the "Red"key of your ONE FOR ALL 5. 1 Place both remote controls (the ONE FOR ALL 5 and your original) on a flat surface. Make sure the ends which you normally point at your device are facing each other. Keep the remotes at a distance of 2 to 5 cm. Press and hold down the M (MAGIC) key until the red LED underneath the POWER key blinks twice (the red LED will blink once then twice). Press the device key (on the ONE FOR ALL remote) to select the mode to which you want to copy the learned function (Example: TV key). Press the key (on the ONE FOR ALL remote) where you want to place the learned function (Example: "Red" key). Press and hold the key (on your original remote) that you want to copy until the red LED blinks twice (Example: "mono/stereo" key). 7 If you want to copy other functions within the same mode, simply repeat steps 5 and 6 pressing the next key you want to copy by learning. 8 To exit the learning mode, press and hold down the M (MAGIC) key until the red LED blinks twice. To access your learned function, press the appropriate device key first. - You can replace a learned function by placing another learned function on top. You can also learn a function on a key of the ONE FOR ALL without sacrificing the original ONE FOR ALL function. A Shifted Learning function can also be put on any key EXCEPT for the following: Device keys, MAGIC key, Number keys. to install a Shifted Learning function , simply follow steps 1-8 on the previous page. During step 5, press M (MAGIC) once before you press the key where you are placing the learned function. To access the shifted function, press M (MAGIC) and then the key you have learned on. 1 Press and hold down the M (MAGIC) key until the red LED underneath the POWER key blinks twice (the red LED will blink once then twice). press 9 7 6 (the red LED underneath the POWER key will blink twice). [. . . ] - Key Magic can be assigned to any key EXCEPT the Device keys and the M (MAGIC) key. - Please note all the extended function codes you obtain from customer service for easy future reference. The ONE FOR ALL does not operate your device(s)?Try repeating the Direct Set-Up using another code listed under your brand or start the search method over again to locate the proper code. [. . . ]