User manual ONE FOR ALL URC-9990

[. . . ] URC-9990 UK D F Universal Touch Screen Remote . P. 2 User guide Bedienungsanleitung Mode d'emploi p. 2 S. 44 p. 86 ONE FOR ALL MOSAIC URC-9990 DD-0201 701571 Table Of Contents INTRODUCTION . 143 2 www. oneforall. com Introduction Your ONE FOR ALL MOSAIC is designed to let you use one remote to operate your Video and Audio equipment; any device designed to be operated by an infrared signal. This also includes those devices which operate over 100 kHz. You can choose any combination of 15 devices you would like to operate. [. . . ] MOSAIC will ask you to repeat the procedure again. 8. · Tap on the OK key to accept the capture. MOSAIC will ask you if want to relabel the function key (as selected in step 6). To relabel the function key, tap on the YES key. You will see the LEARN Label Screen. Follow the procedure that is similar to the one starting with step 3 on page 25 to relabel the key and tap the OK key when you're done. To keep the label the same, tap on the NO key. You will see a confirmation screen that says the key has been successfully programmed. To program a function of the same type, tap on the ESC key. To return to the Device Screen, press on ESC or MUTE for at least 2 seconds. · 9. NOTE: Be sure to test the learned function to see if it works. If not, repeat the procedure. www. oneforall. com 23 DELETING ALL LEARNED FUNCTIONS 1. Tap on PERSONALIZATION. You will see the PERSONALIZATION Menu. NOTE: To return to a previous menu, tap on the ESC key. To return to last-displayed Device Screen, press down on ESC or MUTE for at least 2 seconds. · · Tap on the LEARN key. You will see the LEARN Menu. MOSAIC will ask you to confirm your choice. To delete all learned keys, tap on the YES key. You will see a confirmation screen that says all learned keys have been successfully deleted. Tap on the ESC key to return to the LEARN Screen. To cancel deletion of all learned functions, tap on the NO key. If you want to delete a single learned key, see VIEW/DELETE on page 32. NOTE: To return to a previous menu, tap on the ESC key. To return to last-displayed Device Screen, press down on ESC or MUTE for at least 2 seconds. 24 www. oneforall. com LABEL KEYS LABELLING DEVICE KEYS 1. On the Device Screen in the upper left corner, tap Setup. You will see the main SETUP Menu that greets you and asks, "What would you like to configure?" Tap on the PERSONALIZATION key. You will see the PERSONALIZATION Menu. NOTE: To return to a previous menu, tap on the ESC key. To return to last-displayed Device Screen, press down on ESC or MUTE for at least 2 seconds. [. . . ] MOSAIC will unlock the settings and return to the SYSTEM Menu. www. oneforall. com 39 USER RESET If you have updated your entertainment devices or want to completely start over, MOSAIC offers a user reset function so you can clear settings using a single command. IMPORTANT: User Reset does not affect downloaded codes or Device Setup settings. To reset only all user settings including Macros, Moved Keys, Learned Keys, Labelled Keys, and Key Magic functions, as well as all settings for Home Theater, Sound On/Off, Volume Lock, and Lock to their original default values, perform the following steps: 1. On the Device Screen in the upper left corner, tap on Setup. You will see the main SETUP Menu that greets you and asks, "What would you like to configure? [. . . ]