User manual ONE TOUCH ULTRA MINI QUICK REFERENCE GUIDE

[. . . ] æCAUTION: High glucose results If your test result is higher than 180 mg/dL, it may mean hyperglycemia (high blood glucose). If you are uncertain about this test result, consider re-testing. Your healthcare professional can work with you to determine what actions, if any, you should take if your results are higher than 180 mg/dL. If your meter displays HI, you may have a very high blood glucose level (severe hyperglycemia) exceeding 600 mg/dL. [. . . ] This may require immediate treatment according to your healthcare professional's recommendations. Although this result could be due to a test error, it is safer to treat first, then do another test. You may get false low results if you are severely dehydrated. What it means: No result in memory, such as the first time use of the meter. or , Your meter was unable to recall this result. You can still perform a blood glucose test and get an accurate test result. Contact LifeScan Customer Service at 1 800 227-8862 to report this occurrence if this is not your first time use of the meter. Call LifeScan Customer Service toll-free, 24 hours a day, 7 days a week English 1 800 227-8862 Or, Visit us at www. Com What it means: Error message indicates there is a problem with the meter. Apply a blood or control solution sample only after the blood drop icon R appears on the display. If this message continues to appear, contact LifeScan Customer Service at 1 800 2278862. The system described herein is covered by one or more of the following U. Use of the monitoring device included herein is protected under one or more of the following U. Purchase of this device does not act to grant a use license under these patents. Such a license is granted only when the device is used with OneTouch® Ultra® Test Strips. no test strip supplier other than LifeScan is authorized to grant such a license. The accuracy of results generated with LifeScan meters using test strips manufactured by anyone other than LifeScan has not been evaluated by LifeScan. What it means: Error message could be caused either by a used test strip or a problem with the meter. [. . . ] possible causes are test strip damage or an incompletely filled confirmation window. You should repeat the test with a new test strip. What it means: When the symbol appears on the display by itself, the meter battery does not have enough power to perform a test. When replacing the battery, be sure to place it within the fold of the ribbon, then push the battery until it snaps into place. [. . . ]