User manual ONEFORALL URC 3710

[. . . ] Make sure your device is switched on (not on standby). Press and hold down the MAGIC key (for approximately 3 seconds) until the red LED (underneath the ON key in this example) blinks twice. [. . . ] Press and hold down the MAGIC key (for appraximately 3 seconds) until the red LED (underneath the ON key in this example) blinks twice. The red LED will blink once, then twice. - If you wish you may also search for your code using another function than "OFF". Simply choose between 0, 1, 2, 3, VOL+, PLAY, STOP or MUTE instead. Now press CH+ over and over, until your e. - Everytime you press the CH+ key the ONE FOR ALL will send out a POWER signal (the function you chose at step 4) from the next code contained in the memory. - You may have to press this key many times (up to 150 times) so please be patient. - If you skip past a code, you can go to the previous code(s) by pressing the CH- key. - Remember to keep pointing the ONE FOR ALL at your Device while pressing this key. As soon as your Device switches off, press the MAGIC key to store the code. If your Device does not switch on pressing the ON key, simply press the ON key, a number key or CH+ to switch your e. Your brand is not listed in the code section? [. . . ] To obtain warranty service during the warranty period, please call us at the number mentioned on the Customer Service page. Please notice that we need your purchase receipt so that we may establish your eligibility for service. [. . . ]