User manual ONEFORALL URC 3720

[. . . ] Key Magic® (how to program missing functions from your original lost or broken remote) · Key Move (How to move a function to another key `within a device mode' or towards `another device mode') PROBLEM & SOLUTION CUSTOMER SERVICE Your ONE FOR ALL 2 needs 4 new "AAA/LR6" alkaline batteries. 1 Press "Battery Unlock" to unlock the battery cover from the back of your ONE FOR ALL 2. Match the batteries to the + and - marks inside the battery case, then insert the batteries. Additionaly the MAGIC key may be used as SHIFT key. [. . . ] The red LED will blink once, then twice. Then press the TV key and the red light will blink twice. Result: within every mode, whenever you press the VOL+/- or MUTE keys, this will be send out from TV mode. Press and hold down the MAGIC key until the red LED underneath the SAT key will blink twice. The red LED will blink once, then twice. Then press the Volume (-) key and the red LED will blink four times. Result: being in SAT mode, you will be able to control VOL+/- or MUTE functions of your PVR (provided it has volume control). To cancel the , , Volume Lock" for all modes: 1 Press and hold down the MAGIC key until the red LED underneath the last selected device key will blink twice. The red LED will blink once, then twice. Macros (Direct) You can program your ONE FOR ALL 2 to issue a sequence of commands at the press of one button. Any sequence of commands you regularly use can be reduced to one key stroke for your convenience. Example: To switch off your Television and Satellite Receiver with one keypress (e. Red key): 1 Press and hold down the MAGIC key until the red LED underneath the last selected device key will blink twice. The red LED will blink once, then twice. Then press the Red key to which the Macro will be assigned. To store the Macro, press and hold down the MAGIC key until the red LED underneath the last selected device key will blink twice. The red LED will blink once, then twice. Whenever you press the "Red" key, the ONE FOR ALL 2 will switch off your Television and Satellite Receiver. Make sure that you program a Macro on a spare key that you don't use in any mode. Once you program a Macro on a specific key, the sequence will work regardless of the mode (TV and SAT) you are using. Each MACRO can consist of a maximum of 35 key strokes. If you had to hold down a key for a few seconds on the original remote control to get a function, this function may not work in a macro on your ONE FOR ALL remote. [. . . ] The red LED will blink once, then twice. Enter the 5-digit function code (provided by customer service). Press the key to which the function will be assigned. To access the function you have programmed, press the corresponding device key first. [. . . ]