User manual ONEFORALL URC 3740

[. . . ] CODE BLINK OUT (to find out which code is currently programmed) THE LEARNING FEATURE (How to copy functions from your original working remote onto the ONE FOR ALL 4) OPERATIONAL RESET EXTRA FEATURES · Key Magic® (how to program missing functions from your original lost or broken remote) · Key Move (How to move a function to another key `within a device mode' or towards `another device mode') PROBLEM & SOLUTION CUSTOMER SERVICE Your ONE FOR ALL 4 needs 4 new "AAA/LR6" alkaline batteries. 1 Press "Battery Unlock" to unlock the battery cover from the back of your ONE FOR ALL 4. Match the batteries to the + and - marks inside the battery case, then insert the batteries. Additionaly the MAGIC key may be used as SHIFT key. [. . . ] press 9 7 6 (the red LED key will blink twice). Press the device key in which the function will be deleted. Press twice on the learned key which will be deleted (underneath the TV key in this example) and the original functions of the ONE FOR ALL 4 will now be present. - If there is another key which you wish to delete, repeat steps 1-4. - To delete a Shifted Learned feature, press MAGIC before you press "the learned key to be deleted" (during step 4). To delete all learned functions within a specific mode: 1 Press and hold down the MAGIC key until the red LED (underneath the TV key in this example) blinks twice. The red LED will blink once, then twice. The Operational Reset will erase: - all learned functions - all Key Magic functions - all Macros 1 Press and hold down the MAGIC key until the red LED (underneath the TV key in this example) blinks twice. The red LED will blink once, then twice. This is useful if you want to set up two of the same devices on the ONE FOR ALL 4. The code can be set up using "Direct code set up" (pag. To change a device key, see the three examples below. Example 1) Example 2) if you want to program a second TV on the AMP key. If you want to program a second TV on the DVD key. Example 1: To program a second Television on the AMP key (for example), you need to change the AMP key into a TV key, so press: (*) The AMP key has now become a second TV key. Now enter the Set-Up code for your second TV by pressing: (*) _ _ _ _ (TV code) (**) (**) Example 2: To program a second Television on the DVD key (for example), you need to change the DVD key into a TV key, so press: (*) The DVD key has now become a second TV key. Now enter the Set-Up code for your second TV by pressing: (*) _ _ _ _ (TV code) (**) (**) Example: To reset the AMP key to its original mode, press: (*) (**) Example: To reset the DVD key to its original mode, press: (*) (**) Press and hold down the MAGIC key until the red LED underneath the last selected device key will blink twice. This feature allows you control the volume from a certain device, without having to change to that device mode (e. Controlling the volume of your amplifier from any mode). To punch through to AMP volume while in the TV, DVD or SAT mode: 1. Press and hold down the MAGIC key until the red LED underneath the last selected device key will blink twice. The red LED will blink once, then twice. [. . . ] You can Key Move to any key EXCEPT the Device keys, LIGHT and the MAGIC key. Not valid for learned functions or fuctions obtained through Key Magic. Your brand is not listed in the code section?The ONE FOR ALL does not operate your device(s)? [. . . ]