User manual ONEFORALL URC 6231

[. . . ] 16:9 This key provides you the (16:9) wide screen view function, if available on your original remote). MENU The MENU key controls the same function as it did on your original remote. GUIDE In TV, DVD and/or SAT mode you will obtain the "Guide" function (if available on your original remote). aV In TV mode you will obtain the AV / Input function. [. . . ] If your television does not respond or is not functioning properly with one of the codes, follow steps 1-5 with each code listed for your brand. - If none of the codes listed for your brand operate your television, follow the Search Method described in the next section. The Search Method can be used even if your brand is not listed at all. If your Television does not respond to the ZAPPER after trying all the codes listed for your brand, try searching for your code. Example: to search for your TV code: 1 2 3 4 Make sure your TV is switched on (not on standby). Press and hold the MAGIC key until the LED blinks twice (The LED underneath the POWER key will blink once then twice). Next, alternate between POWER and CHANNEL until your Television turns OFF. You may have to press these keys many times (up to 150!Remember, you must aim the ZAPPER at your device the entire time you are searching for your code. When your device turns off, press and release MAGIC to store the code. The ZAPPER should now be ready to operate your Television. Turn your device back on and try all the remote's functions to ensure they are working properly. If some of the ZAPPER'S commands are not operating correctly, try the search method again, you may be using the wrong code. - To set up your DVD player or Satellite Receiver please press the corresponding device key during step 3. Press and hold the MAGIC key until the red LED blinks twice (the LED underneath the POWER key will blink once then twice). For the first digit of your 5-digit code, press RIGHT and count the red blinks. For the second digit, press LEFT and count the red blinks. For the third digit, press UP and count the red blinks. - To blink out the code you programmed for your DVD player or Satellite Receiver please press the corresponding device key during step 2. This is useful if you want to set up two of the same devices on the ZAPPER. [. . . ] LED does not blink when you press a key?/ONE FOR ALL warrants to the original purchaser that this product will be free from defects in materials and workmanship under normal and correct use for a period of one (1) year from the date of original purchase. This product will be replaced free of charge if it has been proven to be defective within the one (1) year warranty period. This warranty does not cover cartons, carrying cases, batteries, broken or marred cabinets or any other item used in connection with the product. [. . . ]