User manual ONEFORALL URC 7110

[. . . ] Macro on "-/-- key" EXT 2 page 3 1 2 3 and mand mand omm Com Com C Macro on "-/-- key" = command 1: TV ON command 2: AV (EXT 1) command 3: AV (EXT 2) · What is my "Set Up Code again? Find out which code is currently set under each of the 6 device modes. 1 blink 1st nr. :1 My Code is? 5 blinks 2nd nr. :5 page 4 1556 5 blinks 3rd nr. :5 6 blinks 4th nr. :6 Key Magic® Key Magic® is an exclusive ONE FOR ALL feature. The design of the ONE FOR ALL ensures that many functions of your original remote control can be operated - even those that do not have their own key on the ONE FOR ALL keypad. [. . . ] Original LOST or BROKEN remote Congratulations!You have successfully programmed the "I/II (mono/streo)" function from your original remote control onto your ONE FOR ALL remote control. NOW whenever you press the "red key" (in tv mode) you will obtain the "I/II (mono/streo)" function. 1 3 sec. How to reset a key to obtain its original function?Press and hold magic for 3 seconds until a mode indicator (Blue LED) stays lit. 1) Select the corresponding device mode (e. g. 2) Press and hold magic for 3 seconds until a mode indicator (Blue LED) stays lit. red) twice. 2 Macro You can program your ONE FOR ALL to issue a sequence of commands at the press of one single key. Any sequence of commands you regularly use can be reduced to one key press for your convenience. For example, you may want to create a macro that will switch ON your TV and then go dirtectly to EXT 2 for your Playstation. 1st command: 2nd command: 3nd command: TV --> POWER (ON) AV --> EXT 1 (Digital Receiver Box) AV --> EXT 2 (Playstation) Ext. 1: Digital Receiver Box Ext. 2: Playstation To set up the Macro mentioned above on the e. g. "-/--" key on your ONE FOR ALL: 1 3 sec. 6 3 sec. Press and hold magic for 3 seconds until a mode indicator (Blue LED) stays lit. Press and hold magic for 3 seconds --> The blue LED will blink twice and then switch off. 2 x2 Congratulations!You have successfully programmed a macro on the "-/--" key. NOW, when you press the -/-- key: 1st: the TV will switch ON. 2nd: the TV will switch to EXT 1 3rd: the TV will switch to EXT 2. The remote will do this in every device mode whenever you press the "-/--" key. Press 9 9 5. --> The blue LED will blink twice. EXT 2 3 Press the key to which the function will be assigned (e. g. [. . . ] If the LED does not blink, the digit is "0". 6 Operational Reset ?? Press 4 for the 1st digit of your 4-digit set up code and count how many times the LED blinks. If the LED does not blink, the digit is "0". The Operational reset will erase all learned functions across all modes and some other programmed functions like Key Magic and Macros. 1) Press and hold magic for 3 seconds until a mode indicator (Blue LED) stays lit. [. . . ]