User manual ONEFORALL URC 7711

[. . . ] - In order to avoid having to re-program your ONE FOR ALL 1 after you remove the batteries, you will need to insert new batteries within 5 minutes. Also it is recommended that you do not use rechargeable batteries. - On the inside of the battery compartment door you will find a label on which to write your Set-Up Codes for future reference. This you will do after setting up your ONE FOR ALL 1 remote for your devices. [. . . ] Make sure your device (television) you wish to operate is switched on (not in standby). If your brand is not listed at all, try the Search Method on page 7. Press and hold down MAGIC until the red light blinks twice (the red light will blink once then twice). Enter your four-digit device code using the number keys. Now aim the ONE FOR ALL 1 remote at your device (television) and press POWER. If your device switched off, the ONE FOR ALL 1 is ready to operate your device. - Most TV's do not switch back on pressing the POWER key, please try pressing a "number" key or the "TV-text off" key to switch your TV back on. - If your device does not respond, follow steps 1 through 5 with each code listed for your brand. If none of the codes listed for your brand operate your device, then try the Search Method described on page 7, even if your brand is not listed at all. If your device does not respond or is not functioning properly with one of the codes, try another code listed under your brand. - Write your device code in the applicable four digit boxes provided in the battery compartment and on page 8 for future reference. --> If your device does not respond to the ONE FOR ALL 1 after you have tried all the codes listed for your brand. --> If your brand is not listed at all. The Search Method allows you to scan through all the codes contained in the memory of the ONE FOR ALL 1. To search for your television code: Press and hold down MAGIC until the ONE FOR ALL 1 red light blinks twice (the red light will blink once then twice). Now press CH+ over and over, until your Television turns off (every time you press the CH+ key the ONE FOR ALL 1 will send out a POWER signal from the next code contained in the memory). You may have to press this key many times (up to 150 times) so please be patient. If you skip past a code, you can go to the previous code(s) by pressing the CH- key. Remember to keep pointing the ONE FOR ALL 1 at your Television while pressing this key. As soon as your television turns off, press MAGIC to store the code. Please try pressing a "number" key or the "TV-text off" key to switch your TV back on. - If you cannot control your Television properly, please continue the Search Method, you may be using the wrong Code. [. . . ] Type/model numbers can often be found in your equipment owner's manual or on the factory plate behind the device. /ONE FOR ALL warrants to the original purchaser that this product will be free from defects in materials and workmanship under normal and correct use for a period of one (1) year from the date of original purchase. This product will be replaced free of charge if it has been proven to be defective within the one (1) year warranty period. This warranty does not cover cartons, carrying cases, batteries, broken or marred cabinets or any other item used in connection with the product. [. . . ]