User manual ONEFORALL URC 7781

[. . . ] POWER Key The Power key controls the same function as it did on your original remote. Device Key Pressing the TV key allows the remote to control the functions of your Television. Number Keys The Number keys (0-9, 10, 20 (AV)) provide functions just like your original remote, such as direct access programme selection. If your original remote uses one/two digit input switching (-/-- symbol), this function can be obtained by pressing the -/-- key, which is the same as the 10 key. [. . . ] Of course, your television must have Teletext capability. On some televisions, this may be done by pressing the TEXT ON key several times. By pressing again, you can see the bottom half of the Teletext page enlarged. To return to regular Teletext viewing, press the EXPAND key again, or press the TEXT ON key, depending on your television. After accessing the text mode, the bottom row of the keys marked red, green, yellow and blue, allow you to access the Fastext functions of your television. If on your original remote control these keys are used for Menu navigation, the ONE FOR ALL Fastext keys may operate in the same way. Important note: For a more detailed explanation of Teletext and Fastext, please refer to the manual of your television. Remember, different televisions control Teletext and Fastext features in different ways. Not all of the Teletext functions may be available for your particular model. Before you start, please read these instructions carefully Make sure your device is switched on (not on standby). Press the TV key on the ONE FOR ALL Press and hold down MAGIC until the red light blinks twice. Please try pressing a "number" key or the "TV-text off" key to switch your TV back on. Once you have Set-Up your ONE FOR ALL, you can blink back your SET-UP CODE for future reference. example: To blink out your Television code: 1 2 Press TV once. Press and hold MAGIC until the red light blinks twice (The red light will blink once and then twice). For the first digit of your four-digit code, press 1 and count all the red blinks. if there are no blinks , the digit is "0". For the second digit, press 2 and count all the red blinks. if there are no blinks , the digit is "0". For the third digit, press 3 and count all the red blinks. Write down the code for your device in the boxes below and in the battery compartment for quick and easy reference. The ONE FOR ALL does not operate your device ? [. . . ] If you still have questions about the operation of your ONE FOR ALL 1 universal remote and could not find the answer(s) in the TroubleShooting section, you may want to contact the customer service department for assistance. You may care to visit our Internet-site: Our internet-site has many advantages: - 24 hours access - no waiting time - page for Frequently Asked Questions - info about the ONE FOR ALL product range Before contacting us, by Fax, E-mail or Phone, make sure you have the required information available by filling in the table below. What do we need to know before you contact us: 1 2 3 Device TV That you have the ONE FOR ALL 1 URC-3415 universal remote. A list of your equipment/models: (see example below). [. . . ]