User manual ONEFORALL URC 7930

[. . . ] Key Magic (How to program missing functions) TROUBLE-SHOOTING CUSTOMER SERVICE Your ONE FOR ALL 3 needs 2 new "AA/LR6" alkaline batteries. 1 2 3 Remove the battery cover from the back of your ONE FOR ALL 3. Match the batteries to the + and - marks inside the battery case, then insert the batteries. Power (LED) The POWER key operates the same function it did on the original remote control. [. . . ] If you skip past a code, you can go to the previous code(s) by pressing the CHkey. Remember to keep pointing the ONE FOR ALL 3 at your Television while pressing this key. As soon as your television turns off, press the M (MAGIC) key to store the code. Please try pressing a "number" key or the "TV-text off" key to switch your TV back on. - To search for the code for another device follow the instructions above only press the appropriate device key instead of TV during step 2. - If your Video's original remote control does not have a POWER key, press PLAY instead of POWER during step 5. Once you have Set-Up your ONE FOR ALL 3, you can blink back your SET-UP CODE for future reference. example: To blink out your Television code: 1 2 Press TV once. Press and hold down the M (MAGIC) key until the red LED underneath the POWER key blinks twice (the red LED will blink once then twice). For the first digit of your four-digit code, press 1 and count all the red blinks. if there are no blinks , the digit is "0". For the second digit, press 2 and count all the red blinks. if there are no blinks , the digit is "0". For the third digit, press 3 and count all the red blinks. This is useful if you want to set up two of the same devices on the ONE FOR ALL 3. The code can be set up using "Direct code set up" (pag. To change a device key, see the three examples below. Example 1) Example 2) Example 1: To program a second Television on the VCR key (for example), you need to change the VCR key into a TV key, so press: (*) The VCR key has now become a second TV key. Now enter the Set-Up code for your second TV by pressing: (*) Example 2: To program a second Television on the DVD key (for example), you need to change the DVD key into a TV key, so press: (*) The DVD key has now become a second TV key. Now enter the Set-Up code for your second TV by pressing: (*) (**) (**) if you want to program a second TV on the VCR key. If you want to program a second TV on the DVD key. Resetting a Device key Example: To reset the VCR key to its original mode, press: (*) Example: To reset the DVD key to its original mode, press: (*) (**) Press and hold down the M (MAGIC) key until the red LED underneath the POWER key blinks twice. [. . . ] - If you had to hold down a key for a few seconds on the original remote control to get a function, this function may not work in a macro on your ONE FOR ALL remote. - If you program a Macro on a key, the original function will become shifted (excluding CH+/- and VOL+/- keys). Press M (MAGIC) key then the key to access it. If you place a Macro shifted on a digit key, access the original function by pressing the M (MAGIC) key twice and then the digit key. [. . . ]