User manual ONEFORALL URC 7950

[. . . ] CODE BLINK OUT (To find out which code is currently programmed) QUICK CODE REFERENCE THE LEARNING FEATURE (How to copy functions from your original working remote onto the ONE FOR ALL 5) OPERATIONAL RESET EXTRA FEATURES · Key Magic (How to program missing functions) TROUBLE-SHOOTING CUSTOMER SERVICE Your ONE FOR ALL 5 needs 2 new "AA/LR6" alkaline batteries. 1 2 3 Remove the battery cover from the back of your ONE FOR ALL 5. Match the batteries to the + and - marks inside the battery case, then insert the batteries. Power (LED) The POWER key operates the same function it did on the original remote control. [. . . ] Example: To copy the "mono/stereo" function from your original TV remote onto the "Red"key of your ONE FOR ALL 5. 1 Place both remote controls (the ONE FOR ALL 5 and your original) on a flat surface. Make sure the ends which you normally point at your device are facing each other. Keep the remotes at a distance of 2 to 5 cm. Press and hold down the M (MAGIC) key until the red LED underneath the POWER key blinks twice (the red LED will blink once then twice). Press the device key (on the ONE FOR ALL remote) to select the mode to which you want to copy the learned function (Example: TV key). Press the key (on the ONE FOR ALL remote) where you want to place the learned function (Example: "Red" key). Press and hold the key (on your original remote) that you want to copy until the red LED blinks twice (Example: "mono/stereo" key). 7 If you want to copy other functions within the same mode, simply repeat steps 5 and 6 pressing the next key you want to copy by learning. 8 To exit the learning mode, press and hold down the M (MAGIC) key until the red LED blinks twice. To access your learned function, press the appropriate device key first. - You can replace a learned function by placing another learned function on top. You can also learn a function on a key of the ONE FOR ALL without sacrificing the original ONE FOR ALL function. A Shifted Learning function can also be put on any key EXCEPT for the following: Device keys, MAGIC key, Number keys. to install a Shifted Learning function , simply follow steps 1-8 on the previous page. During step 5, press M (MAGIC) once before you press the key where you are placing the learned function. To access the shifted function, press M (MAGIC) and then the key you have learned on. 1 Press and hold down the M (MAGIC) key until the red LED underneath the POWER key blinks twice (the red LED will blink once then twice). press 9 7 6 (the red LED underneath the POWER key will blink twice). Press the device key in which the function will be deleted. Press twice on the learned key which will be deleted (the red LED underneath the POWER key will blink twice). * If there is another key which you wish to delete, repeat steps 1-4. [. . . ] Make sure you are using new batteries and are aiming the one for all at your device. Replace batteries with 2 fresh, new "AA" alkaline batteries. The ONE FOR ALL does not respond after pressing a key?The red LED does not blink when you press a key? [. . . ]