User manual ONEFORALL URC 8305

[. . . ] device Keys The TV , VCR , SAT and DVD keys select the device to be controlled. For example pressing the TV key allows the remote to control the functions of your Television, after pressing VCR you can operate your Video Recorder and the SAT key operates your Satellite Receiver or Cable Converter. Number Keys The Number keys (0-9, 10, 20 (AV)) provide functions just like your original remote, such as direct access programme selection. If your original remote uses one/two digit input switching (-/-- symbol), this function can be obtained by pressing the -/-- key, which is the same as the 10 key. [. . . ] Press and hold down MAGIC until the red light blinks twice. (The red light will blink once and then twice. Enter your (four-digit device code) using the number keys. Now, the 8 aim9 ONE FOR ALL 4 at your device and Press POWER If your device switches off, the ONE FOR ALL 4 is ready to operate your device. Turn your device back on and try all the remote's functions to ensure theyU are working properly. If B the functions do not work properly, SAT AX TV VCR CL AUX 4 repeat5 1-5 6 another code listed under your brand. 7If your device does not respond, follow steps 1 to 5 with 8 9 each code listed for your brand. If none of the codes listed 2 3 for your brand operate your device, or if your brand is not A V 10 listed 0 all, try the search method described on page 7. Write your code in the four boxes provided in the battery compartment and on page 10 for easy future reference. Please try pressing a "number" key or the "TV-text off" key to switch your TV back on. If your device does not respond or is not funcSLOW VCR tioning properly with one of the codes, try another code listed under your REC brand. if there are no blinks , the digit is "0". For the third digit, press 3 and count all the red blinks. This is useful if you want to set up two of the same devices on the ONE FOR ALL 4. The code can be set up using "Direct code set up" (p. To change a device key, see the three examples below. Example 1) if you would like to program a second TV on the DVD key. Example 2) if you would like to program a second TV on the SAT key. Example 3) if you would like to program a second VCR on the SAT key. 1 second Television A T A U X To program a 12 23VT 3V C R S on the DVD keyR (forL example), you need TV VC CB AUX to change4 45 56 into a TV key, so press: the DVD key 6 The DVD10 10 now become a second TV key. 7 8 9 Now enter the Set-Up code for your second TV23 3 by pressing: 2 1 TV CR TV TV CRC C B A LU X AUX To program a 12 23VT 3VS C A R T S onX the SAT keyC V R (forB L example), you need secondV Television A A T U A U X V V V A 0 0A 10 10 4 4 56 6 5 to change the SAT key into a TV key, so press: 6 45 5 6 The SAT key 10 now4 become a 6 second TV key. TV VR S TV VC BL AUX To program a 12 2C 3TV 3AV C TRecorderX on the SATR keyC (for example), you second Video R S A A UT X A U 1 AV A V TV 10 VCR 0 10 C B L0A U X 4 5 6 need to change the SAT key into a VCR key, so press: 5 6 The SAT key 10 now4 second VCR key. [. . . ] If you still have questions about the operation of your ONE FOR ALL 4 universal remote and could not find the answer(s) in the TroubleShooting section, you may want to contact the customer service department for assistance. You may care to visit our Internet-site: Our internet-site has many advantages: - 24 hours access - no waiting time - page for Frequently Asked Questions - info about the ONE FOR ALL product range Before contacting us, by Fax, E-mail or Phone, make sure you have the required information available by filling in the table below. What do we need to know before you contact us: 1 2 3 Device TV That you have the ONE FOR ALL 4 URC-3445 universal remote. A list of your equipment/models: (see example below). [. . . ]