User manual ONEFORALL URC 8350

[. . . ] THE LEARNING FEATURE (How to copy functions from your original working remote onto the URC-8350) EXTRA FEATURES · Your URC-8350 requires 2 new "AAA/LR03" alkaline batteries. Remove the battery cover from the back of your URC-8350 by pressing down on the tab. Match the batteries to the + and - marks inside the battery case, then insert the batteries. Device Keys The TV, DVD, AUDIO and STB keys select the home entertainment device to be controlled. [. . . ] Press and hold down REWIND + FASTFORWARD simultaneously until the URC-8350's LED (red light) blinks twice (the LED will blink once and then twice). Now press UP over and over, until your Television turns off (every time you press the UP key the URC-8350 will send out a POWER signal from the next code contained in the memory). You may have to press this key many times (up to 150 times) so please be patient. If you skip past a code, you can go to the previous code(s) by pressing the DOWN key. Remember to keep pointing the URC-8350 at your Television while pressing this key. As soon as your television turns off, press OK to store the code. (*) to scan through other device types: Press: to scan through codes for: Television / LCD / Plasma DVD player/recorder or PVR CD, Amplifier or Amp. /Tuner or Miscellaneous Set-Top-Box or Satellite Receiver or Cable Converter Most TV's do not switch on pressing the POWER key. Please try pressing a "number" key or the "TV-text off" key to switch your TV back on. If you cannot control your Television properly, please continue the Search Method, you may be using the wrong Code. To search for the code for another device follow the instructions above only press the appropriate device key instead of TV during step 2 and the appropriate number during step 5. (How to copy functions from your original working remote onto the ONE FOR ALL URC 8350) The URC-8350 comes with a complete library of pre-programmed codes. After you have set up the URC-8350 for your device, you may find that there are one or more keys that you had on your original remote, which do not have a place on the URC-8350 keypad. As a convenience, the URC-8350 offers a special Learning feature that allows you to copy any function from your original remote control onto the keypad of the URC-8350. Before you start: Make sure your original remote control is working correctly. Make sure neither your URC-8350, nor your original remote control is pointing at your device. Example: To copy the "mono/stereo" function from your original TV remote onto the "LAST" key of your URC-8350. Place both remote controls (the URC-8350 and your original) on a flat surface. Make sure the ends which you normally point at your device are facing each other. Keep the remotes at a distance of 2 to 5 cm. Press and hold down REWIND + FASTFORWARD simultaneously until the URC-8350's LED (red light) blinks twice (the LED will blink once and then twice). press 9 7 5 (the LED will blink twice). [. . . ] You can then shut the Power to all devices using the URC 8350. To do this first enter the Energy Saving Mode by pressing the Energy Saver Key. Now you need to select which Power Plug you want to control. Each Plug has a number and the one that shipped with this kit defaults to number 1, so press the number. [. . . ]