User manual ONKYO C-7030

[. . . ] COMPACT DISC PLAYER Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . En-2 C-7030 Instruction Manual Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . En-13 Basic Operation . . . . . . . . . . . . . . . . . . . . . . . En-15 Disc Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . En-21 Setting for MP3/WMA . . . . . . . . . . . . [. . . ] Use white plugs to connect left-channel audio inputs and outputs (typically labeled “L”). Analog audio cable Left (white) Right (red) Left (white) Right (red) Right! • Push plugs in all the way to make good connections (loose connections can cause noise or malfunctions). • To prevent interference, keep audio cables away from power cords and speaker cables. Wrong! Disconnect the power cord before making any connections! RCA/phono audio cable (supplied) Optical digital cable (not supplied) Connect one or the other Coaxial cable Coaxial cable (not supplied) (not supplied) Coaxial IN Optical digital cable (not supplied) CD Optical IN Coaxial IN Hi-fi amp, AV receiver Connect one or the other Optical IN CD-R, MiniDisc, DAT recorder En-13 Connecting the CD Player—Continued Connections With  (Remote Interactive) you can control the C-7030 together with your other -compatible Onkyo AV components. With some Onkyo AV receivers you can use one remote controller to control all your Onkyo components and use the following special  functions: Direct Change If your C-7030 is connected to an -compatible Onkyo hi-fi amp or AV receiver, when you start playback on the C-7030, the AV receiver will select the C-7030 as the input source. Remote Control Operation You can control the C-7030 by using your Onkyo amplifier’s remote controller. See the amplifier’s instruction manual for details. To use the  functions, you need to connect one of the C-7030’s connectors to an connector on another AV component in your system by using the supplied  cable. See the manuals supplied with your other -compatible AV components for more information. Notes: • Use only cables for connections. • The C-7030 has two connectors. You can connect either one to your Onkyo hi-fi amp or AV receiver. The other connector is for connecting additional -compatible components. • Connect the C-7030’s connector only to Onkyo AV components. Connecting to other manufacturer’s AV components may cause them to malfunction. • Some Onkyo -compatible AV components may not support the special functions described here.  (RCA/phono) between the C-7030 and your other Onkyo component even if they are connected digitally. To use  you must make an analog audio connection Disconnect the power cord before making any connections! Coaxial cable (not supplied)  cable (supplied) RCA/phono audio cable (supplied) L R CD  Coaxial IN Onkyo Hi-fi amp, AV receiver En-14 Connecting the Power Cord Before connecting the power cord, connect all of the other components. Plug the power cord into a suitable electrical outlet Basic Operation Turning On CD Player ON/STANDBY 2 3 DIMMER DISPLAY Use the [] or [] button to display “ASb”; then press the [ ENTER ] button. Use the [] or [] button to switch “Off” or “On”; then press the [ ENTER ] button. “COMPLETE” appears on the display. 4 Note: If playback is paused, the power will remain on even after 30 minutes have elapsed; the Auto Standby function will not operate. To turn on the CD Player, press the [ ON/STANDBY] button on the unit or the remote controller. Press the [ ON/STANDBY] button again to set the CD Player to Standby. Changing the Display Brightness Press the remote controller’s [DIMMER] button repeatedly to select the following options: Normal Dim DIMMER Setting Auto Standby (ASb) Dimmer ENTER ENTER Using Headphones   You can specify that if the CD Player is left stopped for 30 minutes, the power will automatically turn off, placing the unit in Standby mode (Auto Standby function). On the North American model: The default setting is “Off”. On the European model: The default setting is “On”. Make settings for this function while playback is stopped. Turn down the volume, then connect your stereo headphones to the [PHONES] jack. You can adjust the volume by using the [PHONES LEVEL] knob. PHONES jack 1 Press the [SETUP] button. En-15 Disc Playback  Disc tray [ I J U DIMMER DISPLAY  RANDOM REPEAT   Q/R ENTER / 1 2 Press the Open/Close [] button to open the disc tray. Place the CD on the tray with the label-side facing up. [. . . ] See “Disc Notes” on page 11. CD playback skips. • Install the C-7030 in a location that is free of vibration. Replace the disc. Can’t enter track numbers for memory playback. • No such track on the CD. Enter another number (page 22). It takes a long time to locate certain tracks. • The disc is dirty. SETUP Can’t access the SETUP menu. • If any track has been selected even when the C-7030 is stopped, you must place it into the full stop state by pressing the [] button before you can view all the SETUP menus. [. . . ]