User manual ONKYO C-705X

[. . . ] English Compact Disc Player C-705X Before using Connections Instruction Manual COMPACT DISC PLAYER TR-1 DUAL OPTICAL OUTPUT Operations STANDBY/ ON STANDBY DISPLAY C-705X Other Information Before using Thank you for purchasing . . . Thank you for purchasing Onkyo C-705X CD player. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new C-705X. Please retain this manual for future reference. Main Features · High-Quality Separate Component · Dual-Channel Optical Digital Outputs · Linear Single-bit D/A Converter · TR-1 Play Mode (for playing only the first song) WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] · Direct Change Press the following button on the component you want to operate. The amplifier will automatically select the input from the corresponding component: ­ The play button on the CD player, MD recorder, or stereo cassette tape deck; or ­ The PRESET /® buttons on the tuner. · Remote Control Operation You can operate all the system components using the remote controller supplied with the amplifier A-905X. · Program Timer You can operate the timer playback and recording functions using the T-405X. (Refer to the T-405X instruction manual for more information. ) · Sleep Timer You can fall asleep to a music/radio program using the timer. (Refer to the T-405X instruction manual for more information. ) · CD Dubbing Simple CD dubbing using a stereo cassette tape deck or MD recorder is possible with the pressing of a single button. (Refer to the K-505X or MD-105X Instruction Manual for more information). · CD/MD Synchro Recording When using a stereo cassette tape deck or MD recorder to record from the CD player or when using a stereo cassette tape deck to record from an MD recorder, you can record with simply starting on a CD player or MD recorder. (Refer to the K-505X or MD-105X instruction manual for more information. ) · Dubbing a specific track from CD You can specify a track on a CD and easily dub it to a connected MD recorder. (Refer to the MD-105X instruction manual for more information. ) 8 Using the remote controller The unit is not shipped with a remote controller. However, you can use a remote controller (RC398S) that is shipped with the A-905X amplifier or an optional remote controller (RC-289C). Remote controller RC-398S When the remote controller RC-398S supplied with the amplifier A-905X is used, operate the remote controller pointing towards the amplifier's remote sensor. Be sure to make the connection securely. If the connection is incomplete, you cannot use the remote controller to operate the unit. A-905X Remote control sensor 30° 30° Notes · Place the unit away from strong light such as direct sunlight or inverted fluorescent light which can prevent proper operation of the remote controller. · Using another remote controller of the same type in the same room or using the unit near equipment which uses infrared rays may cause operational interference. · Do not put any object such as a book on the remote controller. The buttons of the remote controller may be pressed by mistake and drain the batteries. · Make sure the audio rack doors do not have colored glass. Placing the unit behind such doors may prevent proper remote controller operation. · If there is any obstacle between the remote controller and the remote control sensor, the remote controller will not operate. Before Using Connections 5m C-705X RC-398S Note The DISC button on the RC-398S remote controller cannot be used. Operations Remote controller RC-289C When the optional remote controller RC-289C is used, operate the remote controller pointing towards the CD player's remote sensor. C-705X Remote control sensor Other Information 30° 30° 5m RC-289C Note The DISC 1 to DISC 6 buttons and the NEXT SELECTION button on the RC-289C remote controller cannot be used. 9 Connecting to the other components Before connecting · Do not connect the unit's AC power cord to a wall outlet until you have completed all the other connections. · On each pair of connectors, a red connector (marked R) corresponds to the right channel, and a white connector (marked L) to the left channel. Connect white plugs of audio connection cables to L connectors and connect red plugs of audio connection cables to R connectors. [. . . ] (See pages 10-12) · Insert all plugs firmly into jacks. · Improper input selector switch setting on amplifier. See your amplifiers operating instructions for more information. (See page 19) · Replace the disc. [. . . ]