User manual ONKYO C-707CHX

[. . . ] English Compact Disc Changer C-707CHX Before using Connections Instruction Manual COMPACT DISC CHANGER DUAL OPTICAL OUTPUT DISC 1 DISC 2 3 DISC CHANGER DISC 3 Operations STANDBY / ON DISC MODE STANDBY DISPLAY DISC C-707CHX Other Information Thank you for purchasing . . . Thank you for purchasing the Onkyo C-707CHX Compact Disc Changer. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain the optimum performance and listening enjoyment from your new Compact Disc Changer. Please retain this manual for future reference. Main Features · · · · 3-disc stocker changer lets you change two discs while the third plays Incorporates a linear single-bit D/A converter for high-quality playback TR-1 play mode for recording of only the first tracks of CD-singles Two optical outputs supporting DLA LINK 2 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] Refer to the amplifier's instruction manual for connections. Operations 2 Connection to digital equipment, such as an MD, CD Recorder or DAT Using the DIGITAL OUTPUT connector, you can record on digital audio equipment, such as an MD, CD recorder, DAT, etc. For digital recording, connect the equipment to either DIGITAL OUTPUT OPTICAL 1 or 2 connector using the optical cable (option). These connectors can also be used for connecting an amplifier which is equipped with a digital input connector. A connector protection cap is attached to the digital output connector. Remove this cap to connect the unit to other digital equipment. When you are not using the digital output connector, replace this cap. Other Information 3 To AC OUTLET (UNSWITCHED) The AC power cord of another component can be connected to this AC OUTLET connector. This means that if the C-707CHX is plugged into an AC outlet, AC power is available to this AC OUTLET even if the C-707CHX is off. Note The shape, number, and total capacity of the AC outlets may differ depending on the area where the unit is purchased. 120 V, 60 Hz model: Capacity is 120 W in total. 9 Connecting to the other components (continued) Connecting for remote control ( ) connec- If your other components are made by ONKYO and those components are equipped with the tors, you can control this unit with the amplifier's remote controller. Before connecting system hookups for control operations. · The amplifier must be connected in the · Each component has two connectors. There is no difference between those connectors. · The components may be connected in any order. · Remote control operation is not possible if only the remote control cable is connected to the connectors. Connect the audio connection cables correctly. R-805X C-707CHX Supplied cable Note An remote control cable equipped with a 1/8 in. (3. 5mm) diameter miniature two-conductor phone plug is included with this unit and with every tuner and cassette deck that bears the mark. 10 Connecting the power cord (mains lead) Insert the AC power cord (mains lead) into a wall outlet. The STANDBY indicator lights. Using the remote controller The unit is not shipped with a remote controller. However, you can use a remote controller (RC414S/RC-456S) that is shipped with the R-805X amplifier. Remote controller RC-414S/RC-456S When the remote controller RC-414S/RC-456S supplied with the amplifier R-805X is used, operate the remote controller pointing towards the amplifier's remote sensor. Be sure to make the connection securely. If the connection is incomplete, you cannot use the remote controller to operate the unit. R-805X Before Using STANDBY/ ON STANDBY · If you press the OPEN/CLOSE button while the unit is in the standby mode, the power will turn on and the display will light up automatically. · To use the unit with the other Onkyo Separate Collection series components, follow the connection diagram in the R-805X instruction manual to connect the unit to the system. Remote control sensor Connections 30¡ 30¡ 5m C-707CHX RC-414S / RC-456S The RC-414S remote controller is shown in the following illustrations. Notes · Place the unit away from strong light such as direct sunlight or inverted fluorescent light which can prevent proper operation of the remote controller. · Using another remote controller of the same type in the same room or using the unit near equipment which uses infrared rays may cause operational interference. · Do not put any object such as a book on the remote controller. [. . . ] (See pages 8-9. ) · Clean the disc. (See page 23) · Replace the disc. · Place the CD Changer in a more stable location. (See page 23) · Replace the disc. [. . . ]