User manual ONKYO C-S5VL

[. . . ] Contents Important Safety Instructions 2 Precations 3 Super Audio CD / CD Player C-S5VL Instruction Manual Features 5 Before Using This Product 6 Connecting to Other Devices 14 Disc Playback 17 Available Actions During Playback 20 Playback Methods 23 Setup Thank you for purchasing an Onkyo C-S5VL Super Audio CD / CD Player. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new C-S5VL. Please retain this manual for future reference. 27 Troubleshooting 30 Specifications 33 En WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR AVIS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] Search for a folder on a CD containing MP3 or WMA tracks. (See p. 21) MEMORY button Use this button to begin or end memory playback. (See p. 24) 10 Before Using This Product--Continued A-B button Use this button to set the start and end positions for A-B repeat. (See p. 23) ENTER button Finalize your selection. RANDOM button Press this button for random playback. (See p. 23) REPEAT button Press this button for repeat playback. (See p. 23) button Use this button to pause playback. (See p. 20) button Use this button to skip to the beginning of the track being played. (See p. 20) button Use this button to play the disc. (See p. 17) button Use this button to skip to the beginning of the next track. (See p. 20) button Use this button to fast reverse. (See p. 20) button Use this button to stop disc playback. (See p. 20) button Use this button to fast forward. (See p. 20) VOLUME button When using this unit in combination with an Onkyo pre-main amplifer (integrated amplifier), adjust the playback volume by controlling the amplifier. Notes Some pre-main amplifers are not supported. When operating the pre-main amplifer, point the remote controller at the amplifier's sensor. Using the Remote Controller Point the remote controller toward the remote control sensor, within the field shown in the drawing. Approx. 5m (16 feet) - Do not expose the remote control sensor to strong light, such as direct sunlight or inverted fluorescent light. - Using the unit near equipment that emits infrared beams or with another remote controller may cause malfunctions. - Make sure that the audio rack does not have colored glass, as this could prevent the remote controller from functioning properly. - The remote controller will not function if there are obstacles between it and the remote control sensor. - Do not place objects such as books on top of the remote controller. Doing so could depress the buttons on the remote continually and drain the batteries. MUTING button When using this unit in combination with an Onkyo pre-main amplifer, temporarily lower the volume using the amplifier. Press it again to return to the previous volume. Notes Some pre-main amplifers are not supported. When operating the pre-main amplifer, point the remote controller at the amplifier's sensor. 11 Before Using This Product--Continued Supported CD Types Discs with the following logos on their labels can be played back. Disc Type Audio CD Super Audio CD CD-R Logo File Format/File Type PCM Limitations on Playback of MP3 and WMA Files - Use discs recorded using the ISO 9660 Level 1 or 2 file system, and the extended format (Joliet). [. . . ] If there is a risk of condensation, leave the unit for about an hour after turning on the power before use. See Page 17 13 12 13 23 13 24 Can not play tracks in the disc's playback order It takes too long to select tracks (to find the specified track) Can not store tracks in memory Turn off any special playback modes (e. g. Make sure that the disc isn't dirty. Make sure that the disc is placed in the disc tray properly, and that the track number you are specifying exists on the disc. 30 Troubleshooting--Continued Playing Music CDs with Copy Control Functions Problem There is noise during playback, or the audio skips The disc is not recognized, and "NoDISC" appears in the display The first track is not played It takes longer than usual to go to the start of a track Tracks start playing in the middle Some locations can not be played back Playback stops partway through The display is wrong Solution You are playing back a music CD with a copy control function. Some music CDs with copy control functions do not meet CD standards. [. . . ]