User manual ONKYO CDR-205X

[. . . ] English CD Recorder CDR-205X Before using Connections Operating Instructions AUDIO CD RECORDER Operations DUAL OPTICAL INPUT REC AMCS ON / OFF CD DUBBING FINALIZE EDIT/NO YES STANDBY INPUT DISPLAY (PUSH TO ENTER) CDR-205X Other Information Before using Thank you for purchasing . . . Thank you for purchasing the ONKYO CDR-205X CD Recorder. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain the optimum performance and listening enjoyment from your new CDR-205X. Please retain this manual for future reference. Main Features · · · · · CD/CD-R/CD-RW Disc Compatibility · Auto Finalizing Function 32kHz/44. 1kHz/48kHz Sampling-Rate Converter · High-Resolution D/A & A/D Converter 2 Optical Digital Inputs · 1 Optical Digital Output 2-Mode (Album/Fade) One-Touch CD Recording · Digital Signal Synchro Recording Adjustable Recording Volume (Digital/Analog) · RI Compatible Remote Control Included WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] · Erasing data on unfinalized CD-RWs Last track erase: Erases only the last track. Multi-track erase: Erases all tracks from the selected track to the final track. · Erasing data on finalized CD-RWs All track erase: Erases all tracks. TOC erase: Returns a finalized disc to the unfinalized conditions. · Erasing discs Erases all data recorded on the CD-RW. s Digital Signal synchronous recording (see page 28) When recording together with a portable MD player or component that does not have an z connector, you can synchronize the recording with the digital input signal. About the level sync function The level sync function detects the space between tracks (songs, etc. ) in the recording source and automatically assigns track numbers to them during recording. s For analog recording The level sync function automatically turns off. To assign the track numbers, during recording press the o REC at the locations where you want to add them. If there are gaps of no sound 2 seconds or longer between tracks in the recording source, you can turn on the level sync function and have the track numbers assigned automatically (see page 25). Operations s For digital recording The level sync recording automatically turns on. If the digital signal includes the track number information, the track numbers will be automatically assigned. For satellite broadcasts and other digital signals that do not include track number information, turn off the level sync function and assign the track numbers manually (see page 27). 19 CD dubbing (component system operation) EDIT/NO AUDIO CD RECORDER DUAL OPTICAL INPUT REC AMCS CD DUBBING ON / OFF CD DUBBING FINALIZE EDIT/NO YES STANDBY INPUT DISPLAY (PUSH TO ENTER) CDR-205X INPUT Perform CD dubbing to digitally record all the tracks from a music CD to a CD-R or CD-RW. The dubbing mode is selected at the EDIT menu. YES 3 Press the YES button. The current dubbing mode appears. YES Preparation · Turn on the CDR-205X (see page 15). · Place the music CD in the CD player. (Refer to the instruction manual for the C-707CHX). · Place a recordable CD-R or CD-RW in the CDR205X (see page 16). 1 Repeatedly press the INPUT button until "Digital In1" appears. INPUT The current dubbing mode is given on the left side (for the display given above, the current dubbing mode is the album mode). Album: Only record the tracks that can be completely recorded. (Album mode) Fade: Fade-out a track if it cannot be completely recorded. (Fade-out mode) 4 To change the dubbing mode, press the YES button. Note: CD dubbing cannot be performed when "Digital In2" or "Analog In" is selected. To not change the dubbing mode, press the EDIT/NO button. 2 Repeatedly press the EDIT/NO button until "CD DubMode" appears. EDIT/NO YES Notes: · In the fade mode, only the remaining recording time is displayed. · When recording to a CD-RW in the album mode, the remaining possible recording time is not displayed. 20 CD dubbing (component system operation) 5 Press the CD DUBBING button. A finalization confirmation will automatically appear for 5 seconds. Single-track CD dubbing Perform single-track CD dubbing when connected to component system to record the track currently being played (or paused) with the CD player with one touch. CD DUBBING 1 Play the CD with the CD player. 6 To automatically finalize the disc after recording, press the YES button within 5 seconds. CD dubbing begins. YES 2 Press the CD DUBBING button while the track you want to record is playing. A finalization confirmation will automatically appear for 5 seconds. CD DUBBING During CD dubbing, the level sync function turns on. The CD player begins a search for the peak level (may take up to 20 seconds) and the CDR-205X set the optimum recording level to match that peak level (DLA* Link 2 function). Then the music CD is digitally recorded from the first track to the last track. 3 To automatically finalize the disc after recording, press the YES button within 5 seconds. CD dubbing begins. YES When the CD finishes The CDR-205X automatically stops. (To perform finalization after completion, press the FINALIZE button. ) If you pressed the YES button for automatic finalization, then the CDR-205X will stop after finalization. [. . . ] Use while playback is stopped to select the track to play. g (pause) button [36] Press during playback to pause the playback. DISPLAY button [17] Press to change the contents of the display. 14 1 2 3 RANDOM 1 2 3 4 5 6 7 OPERATION 5 6 MEMORY 13 4 7 7 8 9 CLEAR >10 10 / 0 REPEAT REC 12 SET CLEAR SKIP PLAY DISPLAY 8 SKIP ID 11 9 10 8 REMOTE CONTROLLER RC-413C 9 10 SKIP PLAY (skip play mode) button [31, 39] Press to turn the skip play mode on or off for discs that contain SKIP commands. 11 SKIP ID SET/CLEAR button [30, 31] Press to place and remove SKIP commands. [. . . ]