User manual ONKYO CR-505DAB

[. . . ] Contents CD Receiver Introduction 2 CR-505DAB Instruction Manual Connections 11 Getting Started 16 CD/MP3 Playback 20 DAB 24 FM/AM 28 Thank you for purchasing an Onkyo CD Receiver. Please read this manual thoroughly before making connections and turning on the power. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new CD Receiver. Please retain this manual for future reference. Using Other Functions 31 Appendix 35 En WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] Note: With CDs and MP3 discs that contain many tracks, playback may take a while to start. Playing CDs Selecting Tracks by Number You can use the number buttons to select specific tracks. Label side 1 Press the [ ] button to open the disc tray, put the CD on the tray with the label-side facing up, and press the [ ] button again to close the tray. 1 Use the number buttons to enter a track number. Playback starts automatically. For MP3 disc, select the serial number assigned to the track. To enter a track number smaller than or equal to 10, press each number button. For example, to enter track number 10, press [10/0]. Use the [--/---] button to enter track numbers above 10. To enter a track number from 11 to 99, press [--/---] once. For example, to enter track number 15, press [--/---], [1] and [5]. To enter a track number greater than or equal to 100, press [--/---] twice. For example, to enter tranck number 123, press [--/---] twice, [1], [2] and [3]. Be sure to put 8 cm discs in the center of the tray. 2 Press the Play [ back. I To Stop Playback ] button to start playindicator appears on the Playback starts and the Play display. · Press the Stop [ ] button. I To Pause Playback · Press the Play/Pause [ / ] button on the CR-505DAB or Pause [ ] button on the remote controller. · To resume playback, press the Play/Pause [ / ] button on the CR-505DAB or Play [ ] button on the remote controller. 20 Playing CDs--Continued I MP3 Disc STANDBY/ ON CLOCK CALL 1 4 2 5 8 --/--- 3 TIMER Elapsed track time: The length of time that the current track has been playing (default display). 6 9 7 10/0 CLEAR ENTER DISPLAY MODE DISPLAY SLEEP REPEAT MUTING INPUT Track name: Name of the current track. DIRECT Displaying Information This section explains how to display various information, including the remaining track time, remaining disc time, and ID3 tag for MP3 tracks. Folder name: Name of the current folder. 1 During playback, press the [DISPLAY] button repeatedly to cycle through the following options. I Audio CD Elapsed track time: The length of time that the current track has been playing (default display). Notes: · To display the disc name, while playback is stopped, press the [DISPLAY] button. · If a track or folder name contains a character that cannot be displayed, it will be displayed as "*. " Title name: Title of the current track (if ID3 tag present). Remaining track time: The amount of time remaining for the current track ("R" indicator appears). Remaining disc time: The amount of time remaining for the entire disc ("T" indicator appears). 21 Various Playback VOLUME STANDBY/ ON CLOCK CALL 1 2 5 8 --/--- 3 TIMER Number buttons 4 6 9 MIN MAX 7 10/0 CLEAR ENTER DISPLAY MODE MODE SLEEP REPEAT CLEAR ENTER --/--REPEAT STANDBY / ON PHONES INPUT MENU DIRECT BASS TREBLE PRESET PUSH TO ENTER MENU / Play/ Pause MUTING INPUT Random Playback DAB FM AM DIRECT CD With the Random function you can play tracks in random order. Repeat Playback With the Repeat function you can play a track, a folder or a disc repeatedly. 1 While stopped, press the remote controller's [MODE] button repeatedly to display "D-Rdm" indicator. 1 During playback, press the remote controller's [REPEAT] button repeatedly to select repeat mode. D-Rpt: Repeat the disc 2 Press the Play [ playback. T-Rpt: Repeat current track ] button to start random All tracks are played in random order. 3 To cancel random playback, stop playback, and then press the [MODE] button repeatedly until the "Rdm" indicator disappears. Note: When carrying out operations on the CR-505DAB, press the [MENU] button repeatedly to select the RANDOM mode, and then press the Play/Pause [ / ] button to start random playback. F-Rpt: Repeat current folder (MP3 only) 2 To cancel Repeat playback, press the [REPEAT] button repeatedly to turn off the "Rpt" indicator. Note: If you press the [REPEAT] button during memory playback, your custom program will play repeatedly. 22 Various Playback--Continued Memory Playback With the Memory function you can make a custom program of your favourite tracks. 1 While stopped, press the remote controller's [MODE] button repeatedly until the "Mem" indicator appears on the display. 2 To add a track to your program, use the [ ]/[ ] buttons to select it, and then press the [ENTER] button. You can add up to 20 tracks to your program. Tracks can also be added by using the number buttons. For information on using the number buttons to select a track, see "Selecting Tracks by Number" on page 20. You can check which tracks you've added to the program by using the [ ]/[ ] buttons. 3 To start memory playback, press the Play [ ] button. Memory playback stops automatically when all the tracks in the program have been played. Note: When carrying out operations on the CR-505DAB, press the [MENU] button repeatedly to turn on the "Mem" indicator, turn the [ / ] control to select a track, and press the [ / ] control to register. To start memory playback, press the Play/Pause [ / ] button. I To Stop Memory Playback Press the Stop [ ] button. I To Remove the Last Track in the Program While memory playback is stopped, press the [CLEAR] button. Each time you press it the last track in the program is removed. I To Cancel Memory Playback While memory playback is stopped, press the [MODE] button repeatedly until the "Mem" indicator disappears. [. . . ] Does not operate during the ACCUCLOCK function with a message "Clock Setting" displayed. It may take a longer time to read CD/MP3 with many track numbers. Bad receiving conditions may interfere with the setting of the clock using ACCUCLOCK function. CT (Clock Time) information has been taken from a radio station in another time zone. [. . . ]