User manual ONKYO CR-515

[. . . ] Contents CD Receiver Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . 2 CR-515 CR-315 Instruction Manual Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Basic Operation . . . . . . . . . . . . . . . . . . . . . . 27 Playing a Disc. . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] To select the input source, press the remote controller's INPUT [ ]/[ ] buttons repeatedly. On the CD receiver, press the [INPUT] button repeatedly. The input sources are selected in the following order. · CR-515 *1, 2 DIGITAL * To turn on the CD receiver, press the [STANDBY/ON] button on the CD receiver or remote controller. Press the [STANDBY/ON] button again to set the CD receiver to Standby. Tip: When you start playback on (or turn on) an Onkyo RI Dock, CD recorder, MD recorder, or cassette deck that's connected to the CD receiver with an cable and analog audio cable, the CD receiver turns on automatically. Similarly, when you set the CD receiver to On or Standby, the other component will also be set to On or Standby. CD FM 1 AM 1 LINE2 LINE1 DOCK* TAPE * TAPE* 1 · CR-315 CD LINE FM AM DOCK *1 Input Display can be changed (see page 29). *2 CR-515 Asian model only. Using Headphones Turn down the volume, then connect your stereo headphones to the PHONES minijack. You can adjust the volume and mute the sound, as explained earlier. The speakers output no sound while the headphones are connected. PHONES jack Adjusting the Volume CD receiver Remote controller Turn the [VOLUME] control clockwise to increase the volume or counterclockwise to decrease it. You can also use remote controller's VOLUME [ ]/[ ] buttons. 27 Basic Operation--Continued CR-515 / TONE ENTER DIRECT TONE S. BASS MUTING CR-315 DIRECT Adjusting the Bass and Treble Using the Direct Function To turn the Direct function on or off, press the [DIRECT] button on the CD receiver. When the Direct function is off, the tone controls can be used to adjust the sound. When the Direct function is on, the tone controls are bypassed, so you can enjoy a pure sound, and the DIRECT indicator lights up. DIRECT indicator 1 Press the [TONE] button to select Bass. 2 Use the Previous and Next [ ]/[ ] buttons to adjust the bass. The default setting is "±0. " You can adjust the bass and treble from ­3 to +3. Press [ENTER], and then use the Previous and Next [ ]/[ ] buttons to adjust the treble. Notes: · If you press no buttons for 8 seconds, the previous display will appear automatically. · If you press the [TONE] button while the Direct function is on, the Direct function will be turned off. On the remote controller, press the [TONE] button for 3 seconds to turn on the Direct function. On the CR-515, the [DIRECT] button's indicator lights up when the Direct function is on. Muting the Sound To mute the output of the CD receiver, press the remote controller's [MUTING] button. The MUTING indicator flashes on the display. On the CR-515, the volume control indicator flashes, too. MUTING indicator On the CR-515, you can also use the [TONE] button and multi control on the front panel to adjust the bass and treble. Using the Super Bass Function To turn on the Super Bass function, press the [S. BASS] button. To turn off the Super Bass function, press the [S. BASS] button again. On the CR-515, you can also use the [TONE] button on the front panel. [. . . ] (Do not mix different types of batteries or new and old batteries. ) The remote controller is too far away from the CD receiver, or there's an obstacle between them (see page 5). The CD receiver's remote control sensor is being subjected to bright light (inverter-type fluorescent light or sunlight). The CD receiver is located behind the glass doors of a audio rack or cabinet. External Components Interactive control with other Onkyo -capable components is not working. · Make sure the cables and analog audio cables are connected correctly (see pages 19 to 25). [. . . ]