User manual ONKYO CR-725

[. . . ] Contents CD Receiver Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . 2 CR-725 CR-725DAB Instruction Manual Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Basic Operations . . . . . . . . . . . . . . . . . . . . 26 Playing a Disc. . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] When the Direct function is on, the tone controls are bypassed, so you can enjoy a pure sound, and the DIRECT indicator lights up. DIRECT indicator 1 Remote controller Press the [TONE] button to select "Bass". 2 Use the Previous and Next [ ]/[ ] buttons to adjust the bass. The default setting is "±0. " You can adjust the bass and treble from ­3 to +3. Press [ENTER], and then use the Previous and Next [ ]/[ ] buttons to adjust the treble. Notes: · If you press no buttons for 8 seconds, the previous display will appear automatically. · If you press the [TONE] button while the Direct function is on, the Direct function will be turned off. On the remote controller, press the [TONE] button for 3 seconds to turn on the Direct function. The [DIRECT] button's indicator lights up, too. Muting the Sound To mute the output of the CD receiver, press the remote controller's [MUTING] button. The MUTING indicator and the volume control indicator flash on the display. Remote controller You can also use the [TONE] button and multi control on the front panel to adjust the bass and treble. MUTING indicator Using the Super Bass Function To turn on the Super Bass function, press the [S. BASS] button. To turn off the Super Bass function, press the [S. BASS] button again. You can also use the [TONE] button on the front panel. Press the [TONE] button for 3 seconds to turn on the Super Bass function. Note: If you press the [S. BASS] button while the Direct function is on, the Direct function will be turned off. Remote controller To unmute the CD receiver, press the [MUTING] button again. Tips: While the CD receiver is muted: · Turning the [VOLUME] control on the CD receiver or pressing the VOLUME [ ]/[ ] buttons on the remote controller will unmute the CD receiver. · If you turn the CD receiver off, the next time you turn it on, the CD receiver will be unmuted. 27 Basic Operations--Continued Changing the Input Display You can choose what name is displayed when an input source is selected so that it matches the type of component that you've connected to the MD/TAPE IN, DOCK/CDR IN, or OPTICAL DIGITAL IN (CR-725DAB only). When you connect an Onkyo -capable component, it's important that you select the input source name that matches the type of component for to work properly. (CR-725DAB only) DIGITAL INPUT / MENU/NO / ENTER GAME/dig * CD-R/dig PC/dig When you select an input source name, you cannot select it as the recording component at the set timer recording. 4 Press [ENTER] to confirm your selection. 1 Use the INPUT [ ]/[ ] buttons to select the input source whose name you want to change. CR-725DAB: TAPE, DOCK, DIGITAL CR-725: TAPE, DOCK Press and hold the [MENU/NO] button until "Name Select?" appears on the display, and then press [ENTER]. HOLD "Complete" appears on the display. You can also use the front panel controls. 1 Use the [INPUT] button to select the input source whose name you want to change. 2 Push the multi control to select "Name Select?, " and then push it again. 3 Turn the multi control to select the new input source name. 4 Push the multi control to confirm your selection. 2 Input Source Name Abbreviations Sometimes the input source name may be displayed as a 2-letter abbreviation, as per the following table. Full name CDR DAT DIGITAL GAME Abbreviation CR DT DG GM DC LI L1 L2 MD PC TP VD 3 Use the Previous or Next [ ]/[ ] button to select the new input source name. DOCK LINE LINE1 LINE2 MD PC The input source names are selected in the following orders: TAPE MD DAT* DOCK PC CD-R VIDEO* TAPE VIDEO 28 Playing CDs Display Disc tray / 1 Press the Open/Close [ ] button to open the disc tray. Tip: Pressing the Open/Close [ ] button while the CD receiver is on Standby will turn on the CD receiver and open the disc tray. [. . . ] External Components Interactive control with other Onkyo -capable components is not working. · Make sure the cables and analog audio cables are connected correctly (see pages 19 to 23). Connecting only an cable won't work. · Make sure the Input Display matches the type of device that you've connected to the CD receiver (see page 28). · When recording an MP3 CD to an Onkyo recording component, recording will start without performing a peak search when the [CD DUBBING] button is pressed on the recording component. [. . . ]