User manual ONKYO CR-N7

[. . . ] Contents CD Receiver Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . 2 CR-N7 Instruction Manual Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Playing a Disc. . . . . . . . . . . . . . . . . . . . . . . . . . 22 Listening to the Radio . . . . . . . . . . . [. . . ] The speakers will reproduce no sound while the headphones are connected. To PHONES jack Adjusting the Volume CD receiver Remote controller Turn VOLUME clockwise to increase the volume or counterclockwise to decrease the volume on the unit. Press VOLUME / on the remote controller. 22 Understanding Common Operations--Continued Adjust sound quality during playback with CD or radio, etc. MUTING 2 1 S. BASS Adjusting Bass Adjusting Treble 1 Press TONE repeatedly to select "Bass. " 1 Press TONE repeatedly to select "Treble. " 2 Press / to adjust, and ENTER to set. · The factory default value is set to "±0"; you can adjust the value by increment or decrement of 2 steps between ­10 and +10. Note: If you leave the system untouched for 8 seconds, the display returns to the previous screen. 2 Press / to adjust, and ENTER to set. · The factory default value is set to "±0"; you can adjust the value by increment or decrement of 2 steps between ­10 and +10. · Press ENTER to return to the previous display. Note: If you leave the system untouched for 8 seconds, the display returns to the previous screen. Emphasizing the Low End Using the Remote Controller Muting the Sound Press MUTING on the remote controller. The MUTING indicator blinks in the display. Press S. BASS repeatedly. Pressing S. BASS repeatedly will change the option in the following order. S. Bass Off MUTING S. Bass 1 (Low end is emphasized. ) S. Bass 2 (Low end is even more emphasized. ) To restore the sound, press MUTING again. Tips: During muting: · If you turn the VOLUME knob on the CD receiver or press VOLUME / on the remote controller, the sound will be restored. · If you turn the unit off and then on again, the sound will be restored. 23 Playing a CD 11 Selecting the Track to Play To locate the beginning of the playing track, turn MULTI JOG counterclockwise slightly. · If you turn it further, you can select the previous tracks in reverse order. · For MP3 discs, you can also select tracks in other groups. · Rotate the dial counter-clockwise while the unit is stopped to select the previous track. Press the dial while the unit is stopped to start playback. · A CD track can also be selected and played back by pressing MULTI JOG while the CD is playing or stopped. Each press skips one track ahead. Display 1- 2 2 MULTI JOG 1 Insert a CD (Compact Disc). 1 Press to extend the disc tray. 2 Place the CD in the tray with the label side facing up. If you play a 8 cm CD, place it in the center circle of the tray. Audio-CD "DISC TOTAL" Lights up while the disc information is displayed. CD NORMAL SOURCE TRACK DISC TOTAL Locating a Particular Point in a Track Press and hold to fast forward, and to fast reverse during playback or pause until you locate the desired point. Notes: · When fast-forwarding or fast-reversing a CD, the unit searches the desired point ten times faster than the normal speed. If you press and hold or longer than four seconds, the unit starts searching the desired point 60 times faster. [. . . ] · If the turntable has no phono equalizer built in, you must provide one separately. Timer Function Timer playback or recording does not work. · The clock should be set correctly. If the clock is not set, playback or recording does not work. (See page 44. ) · Timer operation is not activated if the power to the unit is turned on before the timer On time. [. . . ]