User manual ONKYO CR-N755

[. . . ] Network CD Receiver Getting Started . . . . . . . . . . . . . . . . . . . . . . . . 2 CR-N755 Instruction Manual Connections . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Basic Operations . . . . . . . . . . . . . . . . . . 17 Playing CDs . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] This completes the Windows Media Player 12 configuration. You can now play the music files in your Windows Media Player 12 library. Tip: • On the “Stream” menu, confirm that “Allow remote control of my Player. . . ” is checked. 1 2 3 4 5 Start Windows Media Player 11. On the “Library” menu, select “Media Sharing”. The “Media Sharing” dialog box appears. Select the “Share my media” check box, and then click “OK”. A list of the supported devices appears. Select the CD receiver in the list, and then click “Allow”. Click “OK” to close the dialog box. This completes the Windows Media Player 11 configuration. You can now play the music files in your Windows Media Player 11 library through the CD receiver. Tip: • Windows Media Player 11 can be downloaded for free from the Microsoft web site. Using Remote Playback 1 2 3 Turn on the CD receiver. To enable remote playback, you must first configure Windows Media Player 12. On Windows Media Player 12, right-click on a music file. Tip: • For selecting another media server, select the desired media server from the “Other Libraries” menu on Windows Media Player 12. Select the CD receiver in “Remote playback”. The “Play to” window appears and playback on the CD receiver starts. Operations during remote playback can be made from the “Play to” window of Windows 7 on your personal computer. You can adjust the volume by adjusting the volume bar in the “Remote playback” window. If you wish to change this, enter the value from the Web Setup in your browser. Refer to step 3 of “Registering Other Internet Radio” for details (see page 26). The volume value of the remote window and the volume value of the CD receiver may not always match. [. . . ] • In the case of server playback, the above-mentioned file formats may not be played depending on the server type. ■ MP3 (. mp3 or . MP3) • MP3 files must be MPEG-1/MPEG-2 Audio Layer 3 format with sampling rates of 8 kHz, 11. 025 kHz, 12 kHz, 16 kHz, 22. 05 kHz, 24 kHz, 32 kHz, 44. 1 kHz, 48 kHz and bitrates of between 8 kbps and 320 kbps. ■ WMA (. wma or . WMA) WMA stands for Windows Media Audio and is an audio compression technology developed by Microsoft Corporation. Audio can be encoded in WMA format by using Windows Media® Player. [. . . ]