User manual ONKYO DR-L50

[. . . ] Contents Before Using Your DVD Receiver DVD Receiver DR-L50 Instruction Manual Getting Started Setup Basic Operation Advanced Operation Thank you for purchasing the Onkyo DVD Receiver. Please read this manual thoroughly before making connections and turning on the power. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new DVD Receiver. Please retain this manual for future reference. Other E WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] · When using the 24 hour display, you can also use the number buttons. The TIMER indicator lights up. 6 STANDBY Set the power to Standby. Press STANDBY to put the system into standby mode. Caution Even if the playback timer is set, the timer will not operate unless the power is set to the standby mode. Make sure the system is in standby mode. 45 Using the Timer Functions Be sure to preset FM and AM stations beforehand (page 37). Caution · If the current time is not set, you cannot preset the playback timer make sure that the current time is set. · Except for EVERY, all record timers record only once. When the recording is finished, the timer is deactivated. ON MODE RECEIVER TV/ SETUP ACOUSTIC CONTROL STANDBY INPUT SELECTOR LAST M COND. M FUNC. M SEARCH 1 2 3 PROGRAM SP SETUP TEST TONE CH SEL AUDIO ANGLE SUBTITLE 4 5 6 SW MODE DISTANCE UP LATE NIGHT T-D/ ST SURROUND CLEAR Before operating the remote controller Press MODE RECEIVER. 7 IPM 8 T-D SETUP RANDOM 9 DOWN SHIFT TIMER +10 --/--TOP MENU 0 TIMER 2/3/5/ ENTER TV VOL + MENU TV POWER TV CH RETURN TV INPUT TV CH + DVD SETUP TV MUTING REPEAT TV VOL A-B STEP/ SLOW TUNING TUNER PRESET MODE MD/ CDR / TAPE SLEEP DIMMER DISPLAY CLOCK MUTING VOLUME Setting the record timer 1 TIMER Repeatedly press TIMER on the remote control to select REC. Press ENTER after selecting "REC". 5 « Press (5/) to select the desired radio station. Display the desired radio station, then press ENTER. « 2 « Press (5/) to select the recording source. Select TV, FM or AM then press ENTER. 6 Press the (5/) cursor buttons to select ONCE or EVERY. Caution Setting the recording timer to ONCE will only record one time. ONCE recording: Press (5/) to select a day (or NEXT), then press ENTER. (Displays when your next set time) 3 « Repeatedly press (5/) to select the recording start time. When the desired time is displayed, press ENTER. « OR (Selects the day of week) Tip · When setting the timer for MD recording, set the recording to start one minute in ahead since there are cases when recording will not start for a few seconds. · When set to the desired playback start time (ON) is set, playback is automatically set to stop (OFF) in an hour. · When using the 24 hour display, you can use the number buttons to set the time. At first, only the current day blinks. EVERY recording: Set the day. The TIMER indicator at the top of the display lights up when the respective timer is set. 4 « To change the day of week setting: Press (5/) to set the recording end time. Display the desired time, then press ENTER. Press (2/3) so that the desired day blinks. Presses (5/) to select/deselect the day. Press ENTER to confirm the setting. 46 ON MODE RECEIVER TV/ SETUP ACOUSTIC CONTROL STANDBY STANDBY INPUT SELECTOR LAST M COND. M FUNC. M SEARCH 1 2 3 PROGRAM SP SETUP TEST TONE CH SEL AUDIO ANGLE SUBTITLE 4 5 6 SW MODE DISTANCE UP LATE NIGHT T-D/ ST SURROUND CLEAR Before operating the remote controller Press MODE RECEIVER. 7 IPM 8 T-D SETUP RANDOM 9 DOWN SHIFT TIMER +10 --/--TOP MENU 0 TIMER 5/ TV VOL + MENU TV POWER TV CH RETURN TV INPUT TV CH + DVD SETUP TV MUTING REPEAT TV VOL A-B STEP/ SLOW TUNING TUNER PRESET MODE MD/ CDR / TAPE SLEEP DIMMER DISPLAY CLOCK MUTING VOLUME Switching the timer on or off 7 STANDBY Set the power to Standby. Press STANDBY to put the system into standby mode. · The muting function activates during timer recording. If you would like to monitor the sound during recording, press MUTING on the remote to cancel the muting function. Caution · Even if the record timer is set to sure the timer, the timer will not operate unless the power is set to the standby mode. Make sure the system is in standby mode. · Use when you want to cancel an active timer setting, reset a canceled timer, or when you want to revise a record timer. · If the current time is not set, you cannot preset the timer. 1 TIMER Repeatedly press TIMER to select the desired timer type. The TIMER indicator at the top of the display lights up when the respective timer is set. I In the case of overlapping timer settings · When the power is turned on during timer playback, even if you set another timer, it will not be activated. The initial timer is canceled when the standby mode is initiated. WEEKDAY REC WEEKEND Time 9:00 10:00 11:00 12:00 Active Canceled Active 2 Use (5/) to switch the timer on or off. Approx. 2 seconds after switching the timer, the previous screen will reappear. or » on » off » on » off Caution Pressing ENTER, activates the start time (etc. ) setting mode. · If WEEKDAY timer end time and the REC timer start time are set to the same time, the REC timer will not activate. Please all a one-minute difference end time and start time of each times. · If two or more ONCE / WEEKDAY / WEEKEND / REC are set to the same timers start times are given the following priority: ONCE WEEKDAY WEEKEND REC. · If the REC timer is deactivated because the power is already on (etc. ), the TIMER indicator does not light in the display and the timer settings are cancelled. · If the power is already on when a timer's start time occurs and there is another overlapping timer, the second timer will not operate. The power turns off automatically at the end time of the first timer. 47 Enjoying the Sound Effects The surround sound of the DVD Receiver enables you to enjoy the presence of a movie theater or concert hall in your room. Before using any sound effect, make sure the Speaker Setup configurations have been set (see pages 28-30). The speaker configuration is very important for surround sound. See "Connecting Speakers" on page 20 and "Positioning Speakers" on page 21. Following are the sound systems the DVD Receiver can reproduce. I DOLBY DIGITAL Surround and DTS (Digital Theater System) Surround Recommended speaker setup Center Speaker Left front speaker Right front speaker I DOLBY PRO LOGIC II Surround This is a 5-channel surround system of a new generation, bridging the gap between the previous 4-channel (Left/Right Front, Center and monaural surround channels) Pro Logic surround and 5. 1-channel Dolby Digital surround. [. . . ] · Check that the Dolby Digital indicator lights up on the display. · Use the Input Selector to select the correct input. · Firmly connect the z audio connection cable. · Set the playback timer to "on". [. . . ]