User manual ONKYO DS-A1X

[. . . ] Remote Interactive Dock Contents Important Safety Instructions . 2 DS-A1X Instruction Manual Precautions . 7 Using Your Amp's Remote Controller . 11 Thank you for purchasing an Onkyo product. [. . . ] Caution: Connect the supplied cable to only jacks. Do not connect headphones to the jack, as it will damage your equipment. If you've connected the RI Dock's AUDIO OUT L/R jacks to your amp's TAPE (MD, CDR) IN jacks and also want to connect the RI Dock's VIDEO OUT jack to your amp Connect the RI Dock's VIDEO OUT jack to an unused video input on your amp. When you want to watch an iPod slideshow or video, select the video input source first, and then select the TAPE (MD, CDR) input source. Your AV receiver will output the audio being fed to the TAPE (MD, CDR) input, and because the video source doesn't change when the TAPE input source is selected, it'll continue to output the video being fed to the video input. What to do if you already have a component connected to your amp's TAPE input or RI Dock-compatible input Connect the RI Dock to an unused AV input on your amp. However, you will not be able to use any of the functions. AC adapter 5 Yellow Supplied cable White Red AUDIO INPUT L R VIDEO INPUT White Red Wall outlet Supplied AV cable VIDEO INPUT Yellow Yellow -capable amp or TV 1. Using the supplied AV cable, connect the RI Dock's AUDIO OUT L/R jacks to a suitable audio input on your amp. And connect the RI Dock's VIDEO OUT jack to a video input on your Onkyo AV receiver (A) or TV (B). The input you use depends on the type of Onkyo amp you have. See your amp's instruction manual for details. Using the supplied cable, connect the RI Dock's jack to an jack on one of the Onkyo components in your system. Connect the supplied AC adapter to the RI Dock's DC IN jack. 6 Using the RI Dock Putting Your iPod in the RI Dock 1. Turn on your amp, and select the appropriate inputs on your amp. Align your iPod with the RI Dock's iPod slot, and carefully place your iPod in the slot, as shown. Function Overview Basic Operation Note: · Your amp may take several seconds to startup, so you might not hear the first few seconds of the first song. · System On Function When you turn on your amp, the iPod turns on as well. With some amps, you may need to press the [ON] button on your amp's remote controller's twice to turn on the other components in your system. · System Off Function When you turn off your amp, the iPod turns off as well. · If your amp doesn't support the System On, System Off, Auto Power On, and Direct Change functions, you'll need to turn your amp on and off and select the input source manually. · Before you select another input source, stop iPod playback to prevent your amp from selecting the iPod input source by mistake. · If any accessories are connected to your iPod, your amp may not be able to select the input source properly. · While your iPod is in the RI Dock, its volume control has no effect. [. . . ] Always remove your iPod from the case before inserting it into the RI Dock. · The iPod cannot be operated while it's displaying the Apple logo. · If your amp's remote controller has remote mode buttons, make sure you've selected the right mode. · Check the RI Dock's RI MODE switch setting. [. . . ]