User manual ONKYO DS-A1XP

[. . . ] Remote Interactive Dock Contents Important Safety Instructions . 2 DS-A1XP Instruction Manual Precautions . 7 Using Your Amp's Remote Controller . 11 Thank you for purchasing an Onkyo product. [. . . ] See your AV receiver/amp's instruction manual for details. Note: When the AC adapter is unplugged or not connected to the RI Dock, the RI Dock will output no sound, functions will not work, and your iPod's battery will not be charged. Caution: Connect the supplied cable to only jacks. Do not connect headphones to the jack, as it will damage your equipment. What to do if you already have a component connected to your AV receiver/amp's TAPE input or RI Dock-compatible input Connect the RI Dock to an unused AV input on your AV receiver/amp. However, you will not be able to use any of the functions. AC adapter Supplied cable White Red Wall outlet Supplied AV cable White AUDIO INPUT L R Red -capable AV receiver/amp 1. Using the supplied AV cable, connect the RI Dock's AUDIO OUT L/R jacks to a suitable audio input on your AV receiver/amp. The input you use depends on the type of Onkyo AV receiver/amp you have. See your AV receiver/amp's instruction manual for details. Using the supplied cable, connect the RI Dock's jack to an jack on one of the Onkyo components in your system. Connect the supplied AC adapter to the RI Dock's DC IN jack. 6 Using the RI Dock Putting Your iPod in the RI Dock 1. Turn on your AV receiver/amp, and select the appropriate inputs on your AV receiver/amp. Align your iPod with the RI Dock's iPod slot, and carefully place your iPod in the slot, as shown. Function Overview Basic Operation Note: · Your AV receiver/amp may take several seconds to startup, so you might not hear the first few seconds of the first song. · System On Function When you turn on your AV receiver/amp, the iPod turns on as well. With some AV receivers/amps, you may need to press the [ON] button on your AV receiver/amp's remote controller's twice to turn on the other components in your system. · System Off Function When you turn off your AV receiver/amp, the iPod turns off as well. · Auto Power On Function*1 If you start iPod playback while your AV receiver/amp is on Standby, your AV receiver/amp will automatically turn on and select your iPod as the input source. · Direct Change Function*1 If you start iPod playback while listening to another input source, your AV receiver/amp will automatically select your iPod as the input source. · Timer Play You can use your AV receiver/amp's Timer function to turn on your AV receiver/amp and iPod and start playback at a specified time. If you adjust your iPod's volume control while it's in the RI Dock, make sure it's not set too high before you reconnect your headphones. Using Your iPod's Alarm Clock You can use your iPod's Alarm Clock function to automatically turn on your iPod and AV receiver/amp at a specified time. Your AV receiver/amp's input source will automatically be set to the input to which your iPod is connected. Notes: · To use this function, your iPod must be in the RI Dock, and the RI Dock must be connected to your AV receiver/amp with both an cable and an audio cable. [. . . ] Always remove your iPod from the case before inserting it into the RI Dock. · The iPod cannot be operated while it's displaying the Apple logo. · If your AV receiver/amp's remote controller has remote mode buttons, make sure you've selected the right mode. · Check the RI Dock's RI MODE switch setting. [. . . ]